Kenwood DDX396 Instruction Manual page 48

Settings Settings
<Smartphone Setup>
Specify the connection method of Android/iPod/
iPhone.
1
Select the device type ( 1 ), then touch
[Change] ( 2 ).
Smartphone Setup
Initial Information
Device Type iPod / iPhone
Connection Type Bluetooth
Device Name Device Name
Device Type Select
iPod / iPhone Android / Other Change
2
Select the connection method (
confirm the selection ([OK] or [Next]) (
If [iPod/iPhone] is selected in step 1:
Smartphone Setup
USB 1 Wire Bluetooth
OK
[USB 1 Wire] Select this when the device is
connected via the USB input
terminal (cable from the rear
panel).
[Bluetooth] Select this when the device is
connected via Bluetooth. (Go to
step 3.)
46 ENGLISH
If [Android/Other] is selected in step 1:
Smartphone Setup
The <Paired Device List> screen appears. Go to
step 3.
3
When selecting [Bluetooth] as the
connection method: Select the device (
then press [OK] (
• If the device is already connected, skip step 1.
1 ), then
2 ).
Paired Device List
Device Name 1
Device Name 2
Device Name 3
Device Name 4
Device Name 5
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see "Bluetooth settings" on page 38.
Bluetooth
Next
1
2 ) to connect.
OK
Connection
Remove
<OEM Setup>
(Only for DDX396/DDX376BT/DDX276BT)
Get information, and change the settings for using the
ADS adapter.
<Beep>
For DDX396/DDX419BT, this setting is available only
when 2-way speaker system is selected. (Page 41)
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
),
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
• Available only when <SETUP Memory> is set to
[Unlock] (selected initially).
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings and
return to the factory (initial) settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
You can also set to lock the <SETUP Memory> from
being changed. Touch [Lock] to lock the settings.
• Some items in <Setup> menu, e.g. <Speaker/
X'over>, cannot be adjusted when [Lock] is
selected.