Installing The Unit; Removing The Unit - Kenwood DDX396 Instruction Manual

Installation and Connection Installation and Connection

Installing the unit

Installing the unit using the mounting
bracket removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
Installing the unit using the mounting
sleeve
(Only for DDX396)
'
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Installing the trim plate
(Only for DDX396/DDX419BT)
π / [
Car bracket

Removing the unit

(Only for DDX396)
1
Engage the catch pins on the extraction
keys ( \ ) and remove the two locks on the
lower part of the trim plate (
2
]
3
] ).
]
Catch
Lock
\
Remove from the upper two catches of
the trim plate ( ] ).
The frame can be removed from the top side in the
same manner.
Remove the unit by inserting the two
extraction keys ( \ ), then pulling them as
illustrated.
\
Be careful to avoid injury from the catch pins on
the extraction key.
ENGLISH 55