Settings; Audio Settings - Kenwood DDX396 Instruction Manual

Bluetooth® Bluetooth®
<Auto Connect>
• ON (Initial): Automatically establishes a
connection with the last connected Bluetooth
device when the unit is turned on.
• OFF: Cancels.
<Bluetooth HF/Audio>
Select the speakers used for Bluetooth mobile
phones and Bluetooth audio players.
• Front Only: Front speakers only.
• All (Initial): All speakers.
<Auto Response>
• ON: The unit answers the incoming calls
automatically in 5 seconds.
• OFF (Initial): The unit does not answer the calls
automatically. Answer the calls manually.
<Auto Pairing>
• ON (Initial): Establishes pairing automatically
with an iOS device (such as iPhone) connected
via USB. (Auto pairing may not work for some
devices depending on the iOS version.)
• OFF: Cancels.
<Initialize>
Touch and hold [Enter] to reset all settings you
have made for using Bluetooth mobile phones and
Bluetooth audio players.

Settings

Settings

Audio settings

Display the <Audio> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch [Audio].
Setup
Equalizer
Audio
Enter
Display Sound Effect
Enter
Fader / Balance
Input Enter
Speaker / X'over
System Enter
Time Alignment Enter
E.g. Audio settings screen for DDX396
You cannot change the <Audio> screen in the
following situations:
• When the AV source is turned off.
• When the Bluetooth phone is used (making or
receiving a call, during a call, or while voice dialling).
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again. If the source
is a disc, the adjustments are stored for each of the
following categories.
• DVD/VCD
• CD
• DivX*1/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
Select a preset sound mode on the <Equalizer>
screen.
• Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/
Powerful/User
Equalizer
SRC Name
Preset Q factor
Natural 1.5
[dB]
+9
+7
+5
+3
0
-3
-5
-7
-9
62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k
Bass EXT ON OFF EQ INIT
SW LEVEL 0 ALL SRC
• To apply the adjusted equalizer to all playback
sources, touch [ALL SRC], then touch [OK] to
confirm.
16k [Hz]
ENGLISH 39