KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
12.5.2. When the recording paper is not fed into the unit properly
The display will show the following.
1.
Pull the paper input tray until it clicks into place, then pull it com-
pletely out, lifting the front part of the tray. Remove the recording
paper and straighten.
2.
Re-load the recording paper.
3.
Insert the paper input tray into the base unit, lifting the front part of
the tray. Then push it completely into the base unit.
Note:
• If the message is still displayed, check the recording paper specifications and load the recording paper again.
244