Panasonic KX-MB2061CXB Service Manual page 99

• Hold the paper input tray with both hands when removing or install-
ing. The paper input tray weighs approximately 2 kg when fully
loaded with recording paper.
8.1.3.1. Using the manual input tray
You can use the manual input tray for printing with the computer and for copying. It can hold one page at a time.
When printing or copying multiple pages, add a next page after the first page has been fed into the base unit.
• The unit is set for printing A4-size plain paper by default.
- To use other paper sizes, change the recording paper size setting (feature #381). (Refer to Program Mode Table (P.138).)
- To use thin paper, change the recording paper type setting (feature #384). (Refer to Program Mode Table (P.138).)
1.
Adjust the width of the guides (1) to the size of the recording paper.
2.
Insert the paper, print-side down (2) until the base unit grasps the
paper and a single beep is heard.
Note:
• To print from the manual input tray;
- when printing with the computer, select #2 for the
printer properties.
- when making a copy, set the copy input tray
setting to "#2" beforehand (feature #460). (Refer to Program
Mode Table (P.138).)
If these settings are not changed, when printing or
copying multiple pages, the 1st page will be printed
from the manual input tray, but the rest of the pages
will be printed from the paper input tray.
• If the paper is not inserted correctly, re-adjust the paper, or the
paper may jam.
8.1.3.2. Handset Unit
Important:
• Before installing or removing the handset unit, be sure to turn the power switch OFF.
1. Connect the handset cord (1).
2. Connect the handset connector (2).
• Remove the seal from the handset unit connection jack if attached.
99
KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB