Panasonic KX-MB2061CXB Service Manual page 34

KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
4. Concerning Transmission Time
Transmission Time =
Transmission time consists of the following.
Control time:
This is time at the start of transmission when the functions at the sending and receiving sides are confirmed, the transmis-
sion mode is established, and transmission and reception are synchronized.
Image transmission time:
This is the time required for the transmission of document contents (image data). In general, this time is recorded in the
catalog, etc.
Hold time:
This is the time required after the document contents have been sent to confirm that the document was actually sent, and
to check for telephone reservations and/or the existence of continuous transmission.
5. Facsimile Standards
Connection Control Mode
Terminal Control Mode
Facsimile Signal Format
Modulation Mode
Transmission Speed
Redundancy Compression
Process
(Coding Mode)
Resolution
Line Synchronization Signal
1 Line Transmission Time
[ms/line]
Control Time + Image Transmission Time
Item
Telephone Network Signal Mode
T. 30 Binary
Digital
PSK (V. 27 ter) or QAM (V. 29) or TCM (V17,V34)
300 bps (Control Signal)
33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,
14400, 12000, 9600, 7200, 4800, 2400 bps (FAX Signal)
1 dimension: MH Mode
2 dimension: MR Mode (K=2.4)
3 dimension: MMR Mode
Main Scan: 8 pel/mm
Sub Scan: 3.85, 7.7l/mm
EOL Signal
Depends on the degree of data reduction.
Minimum Value: 10, 20
Can be recognized in 40ms.
+ Hold Time
Telephone Network Facsimile
G3 Machine
34