Panasonic KX-MB2061CXB Service Manual page 98

KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
3.
Load the paper, print-side up (2).
Important:
• Push down to lock the plate (3) in the paper input tray, if neces-
sary.
4.
Adjust the recording paper guides. Pinch the front side of the recording
paper guide (4), then slide it to match the paper size mark. Pinch the
right side of the recording paper guide (5), then slide it to adjust the
width to the size of the recording paper.
• Make sure that the recording paper is under the paper limit mark
(6), and the paper should not be loaded over the snubbers (7).
5.
Insert the paper input tray into the base unit, lifting the front part of the
tray. Then push it completely into the base unit.
Note:
• If the paper is not loaded correctly, re-adjust the paper guides, or
the paper may jam.
• If the paper input tray does not close, the plate in the paper input
tray may not be in the locked position. Push the paper down and
make sure that the paper is laying flat in the paper input tray.
Caution for the paper input tray
• Do not drop the paper input tray.
98