Canon CXDI-1 Operation Manual page 146

B. Using the Rejection Reason Input Function
3
Select [RETAKE].
Touch [RETAKE]. A window will open and the confirmation message "The original
image will be 'rejected'. Do you want to retake the image?" will be displayed. (This
message may not appear depending on the setup performed by the service engineer.)
Touch [OK] to retake the image. The rejection reason input window is opened.
4
Select or enter the rejection reason.
Select the rejection reason from the Reject Reason List.
If the reason you want to enter is not found in the Reject Reason List, touch the Reject
Reason input box to display the keyboard, and enter the reason.
5
Reject the image.
Touch [OK]. The exposure screen appears and the system enters the ready condition with
the same exposure mode selected as that used for the current image.
You cannot select a different exposure mode for retaking the image.
6
Retake the image.
The image displayed in Step 2 will be rejected.
Rejection Reason Input Window
– 138 –