Canon CXDI-1 Operation Manual page 50

4. Browsing Images (Preview Image Screen)
Retaking and rejecting images
When an image is retaken multiple times in succession, all images that are retaken will
be rejected, so only the last image can be output (valid image). The example below
shows the flow of operation when an image is retaken twice.
First retake
First First
image image
taken taken
Retake
Valid Invalid
image image
Flow of operation when an image is retaken twice
An invalid image can be changed to a valid image from the preview image screen.
However, because only one image can be chosen as valid, the image that was
previously valid will automatically be invalidated when another image is validated.
In the example below, the lower image shows a case in which the second image taken
in the above figure is changed to the valid image.
Before the change
First Second
image image
taken taken
Invalid Invalid
image image
When you touch [Reject] for a rejected image on the preview image screen and make
that image the valid image, a window will open and the confirmation message "The
No. n image [Exposure Mode] will be rejected. ("n" is the exposure number of
the valid image.)" will be displayed. Touch [OK].
Also, you can invalidate all the valid images from the preview image screen.
When image processing parameters have been changed before retaking the
image
When parameters are changed on the QA screen after exposure and then [RETAKE] is
touched to retake an image, the parameters used are as follows.
• Changes made to the print setting, mark (except "ROTATE" and "FLIP"), and
"Marker" parameters are valid.
• For other parameters, those that applied when the first image was taken will be
used.
– 42 –
Second First
image image
taken taken
Retake
Valid
image
After validating the second image
Third
image
taken
The case when the
second image
taken in the above
figure is changed
Valid
to the valid image.
image
Changing the valid image
Second retake
Second Third
image image
taken taken
Invalid Invalid Valid
image image image
First Second
image image
taken taken
Invalid Valid
image image
Third
image
taken
Invalid
image