Canon CXDI-1 Operation Manual page 75

To save the changed parameters
Touch [SAVE PARAM].
The edited parameters can be saved as the default for the selected exposure mode.
[SAVE PARAM] is not displayed after the called image is processed from the study list.
To use the image processing software
To use the image processing software, touch [STD. FREQUENCY] to open the window,
and then select [MLT(F) FREQUENCY], [MLT(M) FREQUENCY], or [MLT(S)
FREQUENCY].
NOTE: Advance setting by a service engineer is required to use [MLT(F)
FREQUENCY], or [MLT(M) FREQUENCY].
For the operating procedures of the image processing software, refer to the operation
manual supplied with the software.
7. Processing the Image (QA Mode Screen)
– 67 –