Canon CXDI-1 Operation Manual page 58

5. Viewing Multiple Images (Multi-View Screen)
3
Set the multi-format.
Touch the multi-format button on the print setting window to open the multi-format
window, and set the format.
4
Close the print setting window.
Touch [OK].
5
Display the print preview.
Touch [MULTI VIEW].
When images cannot be printed in multi-format
Images cannot be printed in multi-format in the following cases:
1. When a different multi-format has been set
If images that were set for different multi-format are included in the continuous
images in a single study, the images from different multi-format is assigned to a
different film.
In the example in the figure below, when all four images can be printed in multi-
format, the number of divisions for the images is set at 2x2. In this case, four
images are assigned to one film.
In comparison, when only the first two images can be printed in multi-format,
the number of divisions is set to 2x2 for the first and second image, but the number
of divisions for the third image is set to 1x1. As a result, only the first and second
images are assigned to one film.
All four images can be
printed in multi-format
2. When a different reduction ratio has been selected
If a different reduction ratio is included in fixed ratio printing, the images with
different reduction ratio are assigned to different film even if the same multi-format
is set.
3. When a different film size or film orientation has been selected
Change the print settings.
4. When a different printer has been selected as the output destination
Select the same printer for all the images.
5. When an image taken by the CXDI-31 is included
Images taken by the CXDI-31 are assigned to different films.
Only the first two images can
– 50 –
be printed in multi-format