Mitsubishi Electric A800-GF Instruction Manual page 10

1.2
Inverter component names
Component names are shown below.
(a)
(c)
(b)
(q)
(d)
(e)
Symbol Name
(a) RS-485 terminals
(b) Plug-in option connector 2
(c) Plug-in option connector 3
(d) Voltage/current input switch
(e) Control circuit terminal block
(f) PU connector
(g) USB A connector
(h) USB mini B connector
(i) Upper front cover
(j) Power lamp
(k) Alarm lamp
(l) Charge lamp
(m) Operation panel (FR-DU08)
(n) Lower front cover
(o) Main circuit terminal block
(p) Cooling fan
CC-Link IE Field Network communication
(q)
connector
(r) Operation status indication LED
(f)
(g)
(h)
(s)
(i)
(j)
(k)
(m)
(r)
(l)
(n)
Enables RS-485 communication.
Connects a plug-in option or a communication option.
Selects between voltage and current for the terminal 2 and 4 inputs.
Connects cables for the control circuit.
Connects the operation panel (FR-DU08) or the parameter unit (FR-
PU07). This connector also enables the RS-485 communication.
Connects a USB memory device.
Connects a personal computer and enables communication with FR
Configurator2.
Remove this cover for the installation of the product, installation of a
plug-in (communication) option, RS-485 terminal wiring, switching of
the voltage/current input switch, etc.
Stays ON while the power is supplied to the control circuit (R1/L11, S1/
L21).
Turns ON when the protective function of the inverter is activated.
Stays ON while the power is supplied to the main circuit.
Operates and monitors the inverter.
Remove this cover for wiring.
Connects cables for the main circuit.
Cools the inverter.
For an Ethernet cable which connects to the network.
Indicates the CC-Link IE Field Network communication status.
Inverter component names
(o)
Description
INTRODUCTION
(p)
Refer to
page
55
Instruction
Manual of
the option
1

36
51
54
54
15
31
87
31

15
30
98
53
10
9