ABB ControlMaster CM15 User Manual page 28

ControlMaster CM15
Universal process indicator
...Display
Operator Functions
Autoscroll
Soft Key Function
Configuration
Scroll View
Alarm Ack.
Toggle Signal
Edge Signal
Alarm Ack. Enable
Totalizer Stop/Go
Totalizer Reset
Stats Reset Enable
26
1
/ DIN
8
When enabled (On), operator pages are scrolled continuously at intervals of 10 seconds per
page.
Assigns a dedicated function to the Navigation key (right) – see page 6.
Displays the Access Level enabling selection of configuration levels.
Scrolls through each available Operator view.
Acknowledges all active unacknowledged alarms.
Provides a source that toggles between 2 states – can be assigned to outputs or used to
select sources.
Provides an edge-triggered source that is active on key press. Can be assigned to outputs
or select sources
Turns on / off the ability to acknowledge alarms from the front panel.
Starts / stops the totalizer.
Resets the totalizer.
Turns on / off the ability to reset statistics from the front panel.
7 Advanced Level
IM/CM/I–EN Rev. D