Input/Output - ABB ControlMaster CM15 User Manual

ControlMaster CM15
Universal process indicator

7.3 Input/Output

Enables analog and digital inputs / outputs and relays to be configured.
Menu
Input/Output
Analog Inputs
Analog Input 1 (2)*
Input Type
Digital Volt Free
Freq. Input
Pulse Input
*Analog Input 2: Freq Input, Pulse Input and Resistance not available. A Thermocouple input type can be set only if the first input is set to
Thermocouple.
IM/CM/I–EN Rev. D
1
/ DIN
8
Millivolts, Milliamps, Volts, Resistance (Ohms), RTD, Thermocouple,
Input types comprise:
Digital volt-free, 24V Digital, Freq. Input, Pulse Input
Additional Input Type comments:
Acts as a digital input.
Sets the maximum frequency and equivalent flow rate in the engineering range 0 to 6 KHz.
(A frequency of 0.01 to 6 KHz can be used to create an analog value.)
This parameter counts pulses and is recommended only for use with electromagnetic
flowmeters.
7 Advanced Level
.
31