Huawei AR500 Series Manual

Huawei AR500 Series Manual

Hide thumbs Also See for AR500 Series:

Advertisement

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
About This Chapter
Huawei AR routers are available in AR500, AR510, AR530, AR550, AR1500, and AR2500
series. Select the router models that suit your network requirements.
3.1 Naming Conventions
3.2 AR500 Series
3.3 AR510 Series
3.4 AR530 Series
3.5 AR550 Series
3.6 AR1500 Series
3.7 AR2500 Series
3.1 Naming Conventions
AR500&AR510&AR530&AR550 Series
Figure 3-1
routers.
Figure 3-1 AR500&AR510&AR530&AR550 series naming conventions
Issue 10 (2019-03-06)
shows naming conventions of the AR500&AR510&AR530&AR550 series
Table 3-1
describes the meaning of each letter or digit.
[AR]
[5 3 1 C1]
A
B C D E
Example: AR531G-U-D-H
AR550-8FE-D-H
Copyright © Huawei Technologies Co., Ltd.
3
[-C3]
[-C2]
F
G
3 Chassis
Chassis
[-C4]
H
72

Advertisement

Table of Contents
loading

Summary of Contents for Huawei AR500 Series

  • Page 1 3 Chassis Hardware Description Chassis About This Chapter Huawei AR routers are available in AR500, AR510, AR530, AR550, AR1500, and AR2500 series. Select the router models that suit your network requirements. 3.1 Naming Conventions 3.2 AR500 Series 3.3 AR510 Series 3.4 AR530 Series...
  • Page 2 E: enhanced model developed based on a basic model (enhanced interface or feature performance). l DG: support for dual wireless uplinks. l W: support for Wi-Fi access. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 3 The M3 series, M7 series, and M8 series are available now. – M3: supports an SD card. – M7: supports a mini Serial Advanced Technology Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 4 Table 3-2 AR2500 series naming conventions Field Meaning Description Product name AR: application and access routers. Hardware platform series Currently, three router series are available: 1, 2 and 3. A larger value indicates higher performance. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 5 Table 3-3 Mapping between the AR502CG-L router and software versions Device Model Software Version AR502CG-L V200R008C30 and later versions Appearance and Structure Figure 3-3 shows the appearance of the AR502CG-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 6 (optional). The external antenna is connected to the LTE antenna interface. l You can choose the built-in or external antenna on the web management system. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 7 Product model silkscreen 10 SIM card cover Indicator Description Figure 3-4 shows indicators on the AR502CG-L router. Figure 3-4 Indicators on the AR502CG-L CON RS232 MGMT GE0 V; 1 A Config AR502CG-L Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 8 Fast blinking green: The system is loading or undergoing a USB-based deployment. Steady red: A system fault or USB-based deployment failure has occurred and requires manual intervention. Off: The system software is not running or is resetting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 9 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-5 lists GE electrical interface attributes. Table 3-5 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 10 LTE antenna interface LTE antenna interfaces of a router include a MAIN interface (for the primary antenna). The primary antenna transmits and receives LTE signals. Table 3-7 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 11 Table 3-8 DI/DO interface attributes Attribute Description Connector type 5-pin Phoenix terminal block Signal type l DI: 9.6-60 V DC power input l DO: Boolean value (short circuit and open circuit) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 12 USB interfaces Service interfaces LAN interfaces: two GE electrical interfaces, which can be used as WAN interfaces WAN interfaces: one LTE antenna interface Industrial service interface: CON/RS232 interface and DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 13 Table 3-10 Mapping between the AR502EG-L router and software versions Device Model Software Version AR502EG-L V200R008C20 and later versions Appearance and Structure Figure 3-5 shows the appearance of the AR502EG-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 14 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 15 By default, the DIP switch is in RS485 state and works in half-duplex mode, with pull-up and pull-down resistance of 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-6 shows indicators on the AR502EG-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 16 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 17 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 18 RS232 interface attributes. Table 3-11 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 19 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-13 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 20 Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.2 LTE Whip Antenna 6.3.4 Outdoor LTE Antenna 6.3.3 LTE Indoor Remote Antenna DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 21 The AR502EG-L router has no fans and uses natural heat dissipation. Technical Specifications Table 3-17 lists technical specifications of the AR502EG-L router. Table 3-17 AR502EG-L technical specifications Item Specification System parameters Processor Dual-core, 700 MHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 22 -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010307 (256 MB) 50010435 (512 MB) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 23 Table 3-18 Mapping between the AR502EG-La router and software versions Device Model Software Version AR502EG-La V200R009C00SPC301 and later versions Appearance and Structure Figure 3-7 shows the appearance of the AR502EG-La router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 24 AR502EG-La Config Removing the SIM card cover from the bottom: WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 25 By default, the DIP switch is in RS485 state and works in half-duplex mode, with pull-up and pull-down resistance of 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-8 shows indicators on the AR502EG-La. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 26 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 27 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 28 RS232 interface attributes. Table 3-19 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 29 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-21 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 30 DI/DO interface The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table 3-23 lists DI/DO interface attributes. Table 3-23 DI/DO interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 31 Table 3-25 lists technical specifications of the AR502EG-La router. Table 3-25 AR502EG-La technical specifications Item Specification System parameters Processor Dual-core, 700 MHz Memory 512 MB Flash 512 MB Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010442 3.2.4 AR502EG-Lj Version Mapping Table 3-26 describes the mapping between the AR502EG-Lj router and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 33 Appearance and Structure Figure 3-9 shows the appearance of the AR502EG-Lj router. Figure 3-9 AR502EG-Lj appearance Interfaces on the router: MGMT GE0 AR502EG-Lj Config Removing the SIM card cover from the bottom: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 34 By default, the DIP switch is in RS485 state and works in half-duplex mode, with pull-up and pull-down resistance of 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-10 shows indicators on the AR502EG-Lj. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 35 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 36 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 37 Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable GE Electrical Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 38 Table 3-29 lists USB interface attributes. Table 3-29 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host LTE Antenna Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 39 LVTTL voltage level, digital input/output Cable type 6.2.7 RJ-45 Connector (DI/DO) RS485/RS422 Interface The RS485/RS422 interface can be connected to a meter or monitoring terminal. Table 3-32 lists RS485/RS422 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 40 Power specifications DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC DI/DO interface parameter Voltage level standard: LVTTL Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Table 3-34 Mapping between the AR502EG-L-PD router and software versions Router Model Software Version AR502EG-L-PD V200R009C00SPC301 and later versions Appearance and Structure Figure 3-11 shows the appearance of the AR502EG-L-PD router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 42 A GE(PoE) electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives service traffic at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. A PoE device is connected through this interface to power the router. Table 3-35 lists GE/PoE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 43 Working mode Host RS232 interface The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-37 lists RS232 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 44 9.06 in. x 4.13 in.) Weight 2.13 kg (4.70 lb) Power consumption Maximum power consumption 10 W Power specifications Input power PoE: in compliance with IEEE 802.3af and 802.3at Interface density Management interface USB interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Table 3-39 Mapping between the AR502EGW-L router and software versions Device Model Software Version AR502EGW-L V200R008C20 and later versions Appearance and Structure Figure 3-12 shows the appearance of the AR502EGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 46 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 47 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-13 shows indicators on the AR502EGW-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 48 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 49 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 50 The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-40 lists RS232 interface attributes. Table 3-40 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 51 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-42 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.2 LTE Whip Antenna 6.3.4 Outdoor LTE Antenna 6.3.3 LTE Indoor Remote Antenna Wi-Fi antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 53 The RS485/RS422 interface can be connected to a meter or monitoring terminal. Table 3-46 lists RS485/RS422 interface attributes. Table 3-46 RS485/RS422 interface attributes Attribute Description Connector type 5-pin Phoenix terminal block Standards compliance RS485/RS422 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 54 DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC DI/DO interface parameter Voltage level standard: LVTTL Interface density Management interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 55 Table 3-48 Mapping between the AR502EGRb-L router and software versions Router Model Software Version AR502EGRb-L V200R008C50 and later versions Appearance and Structure Figure 3-14 shows the appearance of the AR502EGRb-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 56 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 57 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-15 shows indicators on the AR502EGRb-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 58 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 59 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 60 GE interface. Interface Description RS232 interface The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-49 lists RS232 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 61 Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 62 Mbit/s and downlink rate of 21.6 Mbit/s l DC-HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 43.2 Mbit/s l Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 63 6.2.8 5-Pin Phoenix Connector (RS485/ RS422) RF antenna interface An RF antenna interface connects to an RF antenna to receive and transmit wireless data. Table 3-55 lists the attributes of an RF antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 64 DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC DI/DO interface parameter Voltage level standard: LVTTL Interface density Management interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 65 Table 3-57 Mapping between the AR502EGRc-Lc router and software versions Router Model Software Version AR502EGRc-Lc V200R008C50 and later versions Appearance and Structure Figure 3-16 shows the appearance of the AR502EGRc-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 66 Config Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 67 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-17 shows indicators on the AR502EGRc-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 68 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 69 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 70 The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-58 lists RS232 interface attributes. Table 3-58 RS232 interface attributes Attribute Description Connector type DB9 Female Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 71 Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 72 SMA-K (screw threads outside and a hole inside) Standards l LTE FDD: bands 1/3/8 compliance and l LTE TDD: bands 38/39/40/41 frequency bands l DC-HSPA+/HSPA+/HSPA/UMTS: bands 1/5/8/9 supported l TD-SCDMA: bands 34/39 l GSM/GPRS/EDGE: 900/1800 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 73 Table 3-62 lists DI/DO interface attributes. Table 3-62 DI/DO interface attributes Attribute Description Connector type RJ45 Signal type LVTTL voltage level, digital input/output Cable type 6.2.7 RJ-45 Connector (DI/DO) RS485/RS422 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 74 Cable type 6.3.6 433 MHz RF Remote Antenna Heat Dissipation The AR502EGRc-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-65 lists technical specifications of the AR502EGRc-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 75 -25°C to +65°C (-13°F to +149°F) l Operating at typical LTE transmit power: -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 76 Table 3-66 Mapping between the AR502EGRz-Lc router and software versions Device Model Software Version AR502EGRz-Lc V200R009C00 and later versions Appearance and Structure Figure 3-18 shows the appearance of the AR502EGRz-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 77 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-18 AR502EGRz-Lc appearance WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. CON/RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 78 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-19 shows indicators on the AR502EGRz-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 79 When a USB flash drive is connected to the router, the ALM indicator works as the USB indicator: Steady red: The system fails to be upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 80 Three indicators off: No signal is available. vertically on the panel, which turn on in sequence. More RSSI indicators in steady on state indicate a larger received signal strength indicator (RSSI) value and higher signal strength. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 81 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-68 lists GE electrical interface attributes. Table 3-68 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 82 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-70 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 83 DI/DO interface A DI interface receives alarm input (9.6-60 V), and a DO interface sends output signals to instruct an external device to perform required actions. Table 3-71 lists DI/DO interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 84 A ZigBee antenna interface connects to a ZigBee antenna to transmit and receive wireless data. Table 3-73 lists ZigBee antenna interface attributes. Table 3-73 ZigBee antenna interface attributes Attribute Description Connector type Standards compliance IEEE 802.15.4 Frequency bands supported 2.4 GHz Rate 250 kbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 85 Maximum power consumption Power specifications DC power input l Rated voltage: 12 V DC/24 V DC l Maximum voltage range: 8 V DC to 36 V DC Interface density Management interfaces USB interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 86 Table 3-75 Mapping between the AR502EGRz-L router and software versions Device Model Software Version AR502EGRz-L V200R009C00 and later versions Appearance and Structure Figure 3-20 shows the appearance of the AR502EGRz-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 87 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-20 AR502EGRz-L appearance WAN interfaces: two LTE antenna RS485/RS422 interface interfaces NOTE SG is the ground for RS485/RS422 signal isolation. CON/RS232 interface DI/DO interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 88 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-21 shows indicators on the AR502EGRz-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 89 When a USB flash drive is connected to the router, the ALM indicator works as the USB indicator: Steady red: The system fails to be upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 90 Three indicators off: No signal is available. vertically on the panel, which turn on in sequence. More RSSI indicators in steady on state indicate a larger received signal strength indicator (RSSI) value and higher signal strength. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 91 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-77 lists GE electrical interface attributes. Table 3-77 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 92 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-79 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 93 Table 3-80 DI/DO interface attributes Attribute Description Connector type 5-pin Phoenix terminal block Signal type l DI: 9.6-60 V DC power input l DO: Boolean value (short circuit and open circuit) RS485/RS422 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 94 6.3.14 Wi-Fi Strip-Shaped Remote Antenna 6.3.10 Wi-Fi Antenna Heat Dissipation The AR502EGRz-L router has no fans and uses natural heat dissipation. Technical Specifications Table 3-83 lists technical specifications of the AR502EGRz-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 95 -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010398 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 96 AR502G-L-D-H router and software versions. Table 3-84 Mapping between the AR502G-L-D-H router and software versions Router Model Software Version AR502G-L-D-H V200R005C80, V200R007C00 Appearance and Structure Figure 3-22 shows the panel of the AR502G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 97 Primary LTE diversity antenna interface DI/DO Interface LTE diversity antenna interface Ground point NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 98 120 ohm matched load resistance. card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-23 shows the indicators on the AR502G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 99 Off: The system is running properly. Green l Slow blinking: The system is running properly. l Fast blinking: The system is powering on or restarting. l Off: The system software is not running or is resetting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 100 Off: The GE interface is in Link Down state. Interface Description RS232 Interface The RS232 interface can be connected to a data terminal for data transmission or to a console for onsite configuration. Table 3-85 lists RS232 interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 101 Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB Interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 102 Table 3-88 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards compliance l GSM/GPRS/EDGE: bands 2/3/5/8 l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/8 l LTE FDD: band 3 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 103 The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table 3-89 lists DI/DO interface attributes. Table 3-89 DI/DO interface attributes Attribute Description Connector type RJ45 Signal type LVTTL voltage level, digital input/output Cable type 6.2.7 RJ-45 Connector (DI/DO) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 104 150 mm x 100 mm x 44 mm (5.9 in. x 3.9 in. x 1.7 in.), 1 U height Weight 0.85 kg (1.87 lb) Power consumption Maximum power consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 105: Table Of Contents

    Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010259 3.2.12 AR502GR-L-D-H Version Mapping Table 3-92 lists the mapping between the AR502GR-L-D-H router and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 106 Software Version AR502GR-L-D-H V200R007C00 Appearance and Structure Figure 3-24 shows the panel of the AR502GR-L-D-H router. Figure 3-24 AR502GR-L-D-H panel Interfaces on the router: Removing the SIM card cover from the bottom: Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 107 150 kohm and without 120 ohm matched load resistance. Indicator Description Figure 3-25 shows the indicators on the AR502GR-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 108 3 and 4 Green l Steady on: A SIM card is installed in the corresponding slot and is working normally. l Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 109 Three indicators off: No signal is available. the panel, which turn on in sequence. More RSSI indicators in steady on state indicate a larger received signal strength indicator (RSSI) value and higher signal strength. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 110 6.7 RS232 Cable GE Electrical Interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-94 lists GE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 111 The primary antenna interface receives and transmits LTE signals. The diversity antenna interface supports 2x2 MIMO and helps improve quality of received LTE signals. Table 3-96 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 112 6.3.2 LTE Whip Antenna 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna DI/DO Interface The DI/DO interfaces are used to detect voltage level signals or deliver instructions. Table 3-97 lists DI/DO interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 113 Table 3-99 lists ZigBee antenna interface attributes. Table 3-99 ZigBee antenna interface attributes Attribute Description Connector type RP-SMA female connector Standards compliance IEEE802.15.4 Frequency bands supported 2.4 GHz Rate 250 kbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 114: Item

    Technical Specifications Table 3-101 lists technical specifications of the AR502GR-L-D-H router. Table 3-101 AR502GR-L-D-H technical specification Item Specification System parameters Processor HI6921 Memory 256 MB Flash 512 MB Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 115: Dc Power Input

    -35°C to +75°C (-31°F to +167°F) when it transmits LTE signals at the the highest transmit power. Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404 ft.) Part number 50010276 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 116 4: + 5: ACC Power input jack LTE1 antenna interface NOTE Use a DC power cable to connect the router to an external power source. LTE0 antenna interface GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 117 The SIM card slots support double-card single-standby. single-standby. l The router must use industrial SIM cards. l The router must use industrial SIM cards. Indicator Description Figure 3-27 shows the indicators on the AR503EDGW-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 118 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-27 Indicators on the AR503EDGW-Lc 2.4G LTE1 LTE0 /BDS 1: - 2: - 3: + 4: + 5: ACC Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 119 Off: No LTE/3G/2G signal is available. GE interface Green Steady on: A link has been established on the indicators interface. (GE0 to GE3) Blinking: Data is being transmitted or received on the link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 120 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-104 lists attributes of an LTE antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 121 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface A GPS/BDS antenna interface can connect to a GPS/BDS remote antenna to provide the GPS/BDS positioning function. Table 3-105 lists the attributes of a GPS/BDS antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 122 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-107 lists attributes of a USB interface. Table 3-107 USB interface attributes Attribute Description Connector type Type A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 123 The AR503EDGW-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-109 lists the technical specifications of the AR503EDGW-Lc router. Table 3-109 AR503EDGW-Lc technical specifications Item Specification System parameters Processor Dual-core, 1.2 GHz Memory 1 GB Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 124: Interface Density

    Service interfaces WAN interfaces: four LTE antenna interfaces LAN interfaces: three Wi-Fi antenna interfaces and four GE electrical interfaces Multimedia service interface: One GPS/BDS antenna interface Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 125 Table 3-110 Mapping between the AR503EDGW-Lc3 router and software versions Router Model Software Version AR503EDGW-Lc3 V200R008C50 and later versions Appearance and Structure Figure 3-28 shows the appearance of the AR503EDGW-Lc3 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 126 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 127 13 Two SIM card slots of LTE1 NOTE l The SIM card slots support double-card single-standby. l The router must use industrial SIM cards. Indicator Description Figure 3-29 shows the indicators on the AR503EDGW-Lc3. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 128 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-29 Indicators on the AR503EDGW-Lc3 2.4G LTE1 LTE0 LTE0 LTE1 /BDS 2.4G 1: - AR503EDGW-Lc3 3: + 100-110 V;1 A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 129 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. LTE0 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 130 LTE antenna interface LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 131 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface A GPS/BDS antenna interface can connect to a GPS/BDS remote antenna to provide the GPS/BDS positioning function. Table 3-113 lists the attributes of a GPS/BDS antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 132 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-115 lists attributes of a USB interface. Table 3-115 USB interface attributes Attribute Description Connector type Type A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 133 The AR503EDGW-Lc3 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-117 lists the technical specifications of the AR503EDGW-Lc3 router. Table 3-117 AR503EDGW-Lc3 technical specifications Item Specification System parameters Processor Dual-core, 1.2 GHz Memory 1 GB Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 134 Service interfaces WAN interfaces: four LTE antenna interfaces LAN interfaces: six Wi-Fi antenna interfaces and four GE electrical interfaces Multimedia service interface: one GPS/BDS antenna interface Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 135 Table 3-118 Mapping between the AR503EDGW-Lo router and software versions Router Model Software Version AR503EDGW-Lo V200R009C00 and later versions Appearance and Structure Figure 3-30 shows the appearance of the AR503EDGW-Lo router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 136 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 137 The SIM card slots support double-card single-standby. single-standby. l The router must use industrial SIM cards. l The router must use industrial SIM cards. Indicator Description Figure 3-31 shows indicators on the AR503EDGW-Lo. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 138 Huawei AR500&AR510&AR531&AR550&1500&AR2500 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-31 Indicators on the AR503EDGW-Lo Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 139 Blinking: Data is being transmitted or received on the link. Off: No link is established on the corresponding interface. Green Steady on: The system power supply is normal. Off: The system power is off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 140 LTE signals. Table 3-120 lists LTE antenna interface attributes. Table 3-120 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 141 GPS/BDS positioning function. Table 3-121 lists the attributes of a GPS/BDS antenna interface. Table 3-121 GPS/BDS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 142 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-123 lists attributes of a USB interface. Table 3-123 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 143 Table 3-125 AR503EDGW-Lo technical specifications Item Specification System parameters Processor Dual-core, 1.2 GHz Memory 1 GB Flash 512 MB Micro SD card Not supported Hard disk mSATA hard disk supported Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 144 When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Storage -40°C to +85°C (-40°F to +185°F) temperature Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 145 V200R008C30 and later versions Appearance and Structure Figure 3-32 shows the appearance of the AR503EQGW-L router. Figure 3-32 AR503EQGW-L appearance LTE3 LTE2 /BDS 1: - AR503EQGW-L 3: + 100-110 V;1 A 9 1011 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 146 The SIM card slots support double-card single-standby. single-standby. l The router must use industrial SIM cards. l The router must use industrial SIM cards. Indicator Description Figure 3-33 shows the indicators on the AR503EQGW-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 147 Figure 3-33 Indicators on the AR503EQGW-L 2.4G LTE3 LTE2 LTE1 LTE0 DANGER Do not plug/unplug power connector with power on. LTE3 LTE2 /BDS 1: - AR503EQGW-L 3: + 100-110 V;1 A 11 12 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 148 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. LTE0 Green Steady on: The LTE/3G/2G signal strength is high. Off: No LTE/3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 149 LTE antenna interface LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 150 Table 3-129 GPS/BDS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported l GPS: 1575.42 MHz l BDS: 1561.098 MHz Cable type 6.3.15 GPS/BDS Remote Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 151 Type A Standards compliance USB2.0 Working mode Host Wi-Fi antenna interface A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 3-132 lists Wi-Fi antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 152 Dimensions (W x 280 mm x 200 mm x 44.4 mm (11.0 in. x 7.9 in. x 1.75 in.), 1 U D x H) height Weight 2.7 kg (5.95 lb) Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 153: Management Interfaces

    1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Storage -40°C to +85°C (-40°F to +185°F) temperature Operating relative 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404.2 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 154 LAN interfaces: four GE electrical USB interface (host) interfaces NOTE l LAN interfaces GE0 to GE3 can be configured as WAN interfaces. l GE0 is a management interface and is used to upgrade the router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 155 CONSOLE interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. Indicator Description Figure 3-35 shows the indicators on the AR503EW router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 156 Industrial Switch Routers 3 Chassis Hardware Description Figure 3-35 Indicators on the AR503EW 2.4G DANGER Do not plug/unplug power connector with power on. AR503EW 1: - 3: + 100-110 V;1 A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 157 Steady on: The system power supply is normal. Off: The system power is off. Red and Slow blinking green: The system is running green properly. Fast blinking green: The system is being powered on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 158 Ethernet interfaces of most network adapters are MDI interfaces. l MDIX stands for medium dependent interface crossover, a version of MDI. MDIX interfaces are usually used on hubs or LAN switches. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 159 2.4 GHz l 5.0 GHz Rate 1750 Mbit/s MIMO mode (Tx x Rx) Gain 2.15 dBi/3.0 dBi Services provided l Layer 2/3 wireless access l Wireless data encryption l WLAN security Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 160 PoE power supply Supported on GE electrical interfaces GE0 to GE3, with a maximum of 30 W power on each interface Power consumption Maximum power 55 W consumption Heat dissipation Fans None Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 161 Table 3-140 lists the mapping between the AR503GW-LM7 router and software versions. Table 3-140 Mapping between the AR503GW-LM7 router and software versions Router Model Software Version AR503GW-LM7 V200R006C12 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 162 To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS antenna interface 10 Two Wi-Fi antenna interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 163 Fast blinking green: The system is being powered on or restarting. Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 164 Steady on: The LTE/3G/2G signal strength is (indicator for high. the 3G/LTE1 Fast blinking: The LTE/3G/2G signal strength is antenna medium. interface) Slow blinking: The LTE/3G/2G signal strength is low. Off: No LTE/3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 165 Table 3-141 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 166 Table 3-143 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported 1575 MHz Cable type GPS+LTE remote diversity antenna GE Electrical Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 167 Type A Standards compliance USB2.0 Working mode Host Wi-Fi Antenna Interface A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 3-146 lists Wi-Fi antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 168 Dimensions and weight Dimensions (W x 200 mm x 160 mm x 44 mm (7.87 in. x 6.30 in. x 1.73 in.), 1 U D x H) height Weight 1.4 kg (3.09 lb) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 169 When the altitude is between 1800 m and 5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m. Storage -40°C to +85°C (-40°F to +185°F) temperature Operating relative 5% to 95%, noncondensing humidity Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 170 RS232 interface NOTE NOTE Use a DC power cable to connect the router The RS232 interface can be used as a console to an external power source. interface to configure the router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 171 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS/BDS antenna interface 10 Two Wi-Fi antenna interfaces Indicator Description Figure 3-39 shows the indicators on the AR503GW-LcM7 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 172 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 173 Off: No LTE/3G/2G signal is available. GPS/BDS Green Steady on: The GPS/BDS function is enabled. Off: The GPS/BDS function is disabled. WLAN1 Green Blinking: Data is being transmitted on the (working at WLAN link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 174 3G/LTE Antenna Interface 3G/LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 175 GPS/BDS Antenna Interface A GPS/BDS antenna interface can connect to a GPS/BDS+LTE remote diversity antenna to provide the GPS/BDS positioning function. Table 3-151 lists attributes of a GPS/BDS antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 176 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-153 lists attributes of a USB interface. Table 3-153 USB interface attributes Attribute Description Connector type Type A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 177 The AR503GW-LcM7 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-155 lists the technical specifications of the AR503GW-LcM7 router. Table 3-155 AR503GW-LcM7 technical specifications Item Specification System parameters Processor Dual-core, 1 GHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 178 USB 2.0 interfaces Service interfaces WAN interfaces: one GE electrical interface and two 3G/LTE (standard antenna interfaces configuration) LAN interfaces: two Wi-Fi antenna interfaces Multimedia service interface: one GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 179 Table 3-156 Mapping between the AR503GW-Lo router and software versions Router Model Software Version AR503GW-Lo V200R009C00SPC301 and later versions Appearance and Structure Figure 3-40 shows the appearance of the AR503GW-Lo router. Figure 3-40 AR503GW-Lo appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 180 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS antenna interface 10 Two Wi-Fi antenna interfaces Indicator Description Figure 3-41 shows indicators on the AR503GW-Lo router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 181 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 182 Off: No LTE/3G/2G signal is available. Green Steady on: The GPS function is enabled. Off: The GPS function is disabled. WLAN1 Green Blinking: Data is being transmitted on the (working at WLAN link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 183 3G/LTE Antenna Interface 3G/LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a DIV interface (for the secondary antenna). The primary and secondary antennas work Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 184 A GPS antenna interface can connect to a GPS+LTE remote diversity antenna to provide the GPS positioning function. Table 3-159 lists attributes of a GPS antenna interface. Table 3-159 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 185 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-161 lists attributes of a USB interface. Table 3-161 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 186 Flash 256 MB Dimensions and weight Dimensions (W x 200 mm x 160 mm x 44 mm (7.87 in. x 6.30 in. x 1.73 in.), 1 U D x H) height Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 187 When the altitude is between 1800 m and 5000 m, the highest operating temperature reduces by 1°C every time the altitude increases by 220 m. Storage -40°C to +85°C (-40°F to +185°F) temperature Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 188 Table 3-164 Mapping between the AR503HGW-L router and software versions Router Model Software Version AR503HGW-L V200R009C00 and later versions Appearance and Structure Figure 3-42 shows the appearance of the AR503HGW-L router. Figure 3-42 AR503HGW-L appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 189 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS antenna interface 10 2 Wi-Fi antenna interfaces Indicator Description Figure 3-43 shows indicators on the AR503HGW-L. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 190 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 191 Off: No LTE/3G/2G signal is available. Green Steady on: The GPS function is enabled. Location Off: The GPS function is disabled. WLAN1 Green Blinking: Data is being transmitted on the (working at WLAN link. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 192 Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable 3G/LTE antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 193 Table 3-167 lists GPS antenna interface attributes. Table 3-167 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported 1575 MHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 194 A USB interface provides up to 5 Gbit/s upload and download rates. Table 3-169 lists USB interface attributes. Table 3-169 USB interface attributes Attribute Description Connector type TYPE A Standards compliance USB3.0 Working mode Host Wi-Fi antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 195 Table 3-171 AR503HGW-L technical specifications Item Specification System parameters Processor Dual-core, 1 GHz Memory 1 GB Flash 256 MB Micro SD card None (default sd1) Hard disk mSATA hard disk supported Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 196 0°C to +60°C (32°F to 140°F) temperature NOTE When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 197 Table 3-172 Mapping between the AR503HGW-Lc router and software versions Router Model Software Version AR503HGW-Lc V200R009C00 and later versions Appearance and Structure Figure 3-44 shows the appearance of the AR503HGW-Lc router. Figure 3-44 AR503HGW-Lc appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 198 Exercise caution when deciding to press this button. Reserved 3G/LTE antenna interface 3G/LTE antenna interface GPS/BDS antenna interface 10 2 Wi-Fi antenna interfaces Indicator Description Figure 3-45 shows indicators on the AR503HGW-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 199 Off: The system software is not running or is resetting. Red and Steady green: The system has been upgraded or green configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 200 Slow blinking: The LTE/3G/2G signal strength is low. Off: No LTE/3G/2G signal is available. GPS/BDS Green Steady on: The GPS/BDS function is enabled. (BDS stands for BeiDou Navigation Satellite System.) Off: The GPS/BDS function is disabled. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 201 Table 3-173 RS232 interface attributes Attribute Description Connector type DB9 Female Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.7 RS232 Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 202 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface A GPS/BDS antenna interface can connect to a GPS/BDS+LTE remote diversity antenna to provide the GPS/BDS positioning function. Table 3-175 lists GPS/BDS antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 203 USB interface (host) A USB interface provides up to 5 Gbit/s upload and download rates. Table 3-177 lists USB interface attributes. Table 3-177 USB interface attributes Attribute Description Connector type TYPE A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 204 The AR503HGW-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-179 lists technical specifications of the AR503HGW-Lc router. Table 3-179 AR503HGW-Lc technical specifications Item Specification System parameters Processor Dual-core, 1 GHz Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 205 1 (DB9) USB 3.0 interfaces Service interfaces WAN interfaces: one GE electrical interface and two 3G/LTE antenna interfaces LAN interfaces: two Wi-Fi antenna interfaces Multimedia service interface: one GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 206 Table 3-180 Mapping between the AR509CG-Lc router and software versions Router Model Software Version AR509CG-Lc V200R008C20 and later versions Appearance and Structure Figure 3-46 shows the appearance of the AR509CG-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 207 Removing the SIM card cover from the bottom: OPEN LTE antenna interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface (host) CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 208 SIM1. l Use a DC power cable to connect the router to an external power source. Indicator Description Figure 3-47 shows the indicators on the AR509CG-Lc. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 209 3 and 4 Green Steady on: A SIM card is installed in the corresponding slot and is working normally. Off: No SIM card is installed in the corresponding slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 210 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 211 The CON/RS232 interface of a router can connect to an operation terminal for onsite configuration. Table 3-181 lists attributes of the CON/RS232 interface. Table 3-181 CON/RS232 interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 212 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-184 lists LTE antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 213 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna Heat Dissipation The AR509CG-Lc router has no fans and uses natural heat dissipation. Technical Specifications Table 3-185 lists the technical specifications of the AR509CG-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 214 -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404.2 ft.) Part number 50010329 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 215 Table 3-186 Mapping between the AR509CG-Lt router and software versions Router Model Software Version AR509CG-Lt V200R008C20 and later versions Appearance and Structure Figure 3-48 shows the appearance of the AR509CG-Lt router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 216 Removing the SIM card cover from the bottom: OPEN LTE antenna interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface (host) CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 217 SIM1. l Use a DC power cable to connect the router to an external power source. Indicator Description Figure 3-49 shows the indicators on the AR509CG-Lt. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 218 3 and 4 Green Steady on: A SIM card is installed in the corresponding slot and is working normally. Off: No SIM card is installed in the corresponding slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 219 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 220 The CON/RS232 interface of a router can connect to an operation terminal for onsite configuration. Table 3-187 lists attributes of the CON/RS232 interface. Table 3-187 CON/RS232 interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 221 DIV interface (for the secondary antenna). The primary and secondary antennas work together. The primary antenna transmits and receives LTE signals, and the secondary antenna helps improve the quality of received LTE signals. Table 3-190 lists attributes of an LTE antenna interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 222 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna Heat Dissipation The AR509CG-Lt router has no fans and uses natural heat dissipation. Technical Specifications Table 3-191 lists the technical specifications of the AR509CG-Lt router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 223 Operating at typical LTE transmit power: -25°C to +70°C (-13°F to +158°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude < 5000 m (16404.2 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 224 Table 3-192 Mapping between the AR509CG-Lt-7 router and software versions Router Model Software Version AR509CG-Lt-7 V200R008C50 and later versions Appearance and Structure Figure 3-50 shows the appearance of the AR509CG-Lt-7 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 225 Removing the SIM card cover from the bottom: OPEN LTE antenna interface Ground point NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface (host) CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 226 If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-51 shows the indicators on the AR509CG-Lt-7. Figure 3-51 Indicators on the AR509CG-Lt-7 CON RS232 MGMT GE0 Config AR509CG-Lt-7 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 227 – Steady green: The system has been upgraded or configured using the USB flash drive. – Fast blinking: The system is being upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 228 The CON/RS232 interface of a router can connect to an operation terminal for onsite configuration. Table 3-193 lists attributes of the CON/RS232 interface. Table 3-193 CON/RS232 interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 229 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-195 lists attributes of a USB interface. Table 3-195 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 230 General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s and downlink rate of 85.6 kbit/s Network protocols LTE, WCDMA, GSM Cable type 6.3.2 LTE Whip Antenna 6.3.3 LTE Indoor Remote Antenna 6.3.4 Outdoor LTE Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 231 V DC Interface density Management interfaces USB interfaces Service interfaces LAN interfaces: four GE electrical interfaces WAN interfaces: two LTE antenna interfaces Industrial service interface: one CON/ RS232 interface Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 232 Table 3-198 Mapping between the AR509CGW-L router and software versions Router Model Software Version AR509CGW-L V200R008C50 and later versions Appearance and Structure Figure 3-52 shows the appearance of the AR509CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 233 Removing the SIM card cover from the bottom: OPEN WAN interfaces: two LTE antenna Ground point interfaces NOTE To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface CON/RS232 interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 234 SIM1 is the default master card. l If only one SIM card needs to be installed, install it in slot SIM1. Indicator Description Figure 3-53 shows indicators on the AR509CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 235 3 and 4 Green Steady on: A SIM card is installed in the slot and is working normally. Off: No SIM card is installed in the slot. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 236 USB flash drive. Green Steady on: The system power supply is normal. Off: The system power supply is abnormal or the router is not connected to a power source. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 237 Interface Description CON/RS232 interface The CON/RS232 interface can connect to an operation terminal for onsite configuration. Table 3-199 lists CON/RS232 interface attributes. Table 3-199 CON/RS232 interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 238 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-201 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 239 Frequency Division Duplexing (FDD) LTE: uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.2 LTE Whip Antenna 6.3.4 Outdoor LTE Antenna 6.3.3 LTE Indoor Remote Antenna Wi-Fi antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 240 Dimensions (W x D x H) 150 mm x 100 mm x 44 mm (5.9 in. x 3.9 in. x 1.7 in.), 1 U height Weight 0.653 kg (1.440 lb) Power consumption Maximum power consumption Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 241 Table 3-205 Mapping between the AR509G-L-D-H router and software versions Router Model Software Version AR509G-L-D-H V200R006C10 and later versions Appearance and Structure Figure 3-54 shows the appearance of the AR509G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 242 GE0 is a management interface and is used to upgrade the router. l All GE LAN interfaces can be configured as WAN interfaces. NOTE Electrical interfaces GE0 to GE3 support PoE+. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 243 PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. 11 USB interface (host) Indicator Description Figure 3-55 shows the indicators on the AR509G-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 244 Slow blinking: The system is running properly. l Fast blinking: The system is being powered on or restarting. l Steady red: A system fault has occurred and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 245 Steady on: A link has been established on the VDSL interface. l Blinking: Data is being transmitted or received on the VDSL interface. l Off: No link is established on the VDSL interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 246 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-207 lists GE electrical interface attributes. Table 3-207 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 247 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards l LTE FDD: bands 1/2/3/4/5/7/8/20 compliance and l DC-HSPA+/HSPA+/HSPA/WCDMA: bands 1/2/5/8 frequency bands l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) supported Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 248 Mbit/s and uplink rate of 1 Mbit/s l ADSL full rate mode (G.992.1 G.DMT): downlink rate of 8 Mbit/s and uplink rate of 1 Mbit/s Cable type 6.9 Standard Telephone Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 249 (DC) Maximum output current RPS power supply Not supported PoE power supply Supported Power consumption Maximum power 12 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 250 Table 3-212 lists the mapping between the AR509G-Lc router and software versions. Table 3-212 Mapping between the AR509G-Lc router and software versions Router Model Software Version AR509G-Lc V200R006C17, V200R008C30 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 251 LAN interfaces: four GE electrical interfaces NOTE l GE0 is a management interface and is used to upgrade the router. l All GE LAN interfaces can be configured as WAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 252 PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. 11 USB interface (host) Indicator Description Figure 3-57 shows the indicators on the AR509G-Lc router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 253 Slow blinking green: The system is running properly. l Fast blinking green: The system is being powered on or is restarting. l Steady red: A system fault has occurred and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 254 Steady on: A link has been established on the VDSL interface. l Blinking: Data is being transmitted or received on the VDSL interface. l Off: No link is established on the VDSL interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 255 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-214 lists GE electrical interface attributes. Table 3-214 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 256 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards l LTE FDD: bands 1/2/3/4/5/7/8/20 compliance and l DC-HSPA+/HSPA+/HSPA/WCDMA: bands 1/2/5/8 frequency bands l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) supported Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 257 Mbit/s and uplink rate of 1 Mbit/s l ADSL full rate mode (G.992.1 G.DMT): downlink rate of 8 Mbit/s and uplink rate of 1 Mbit/s Cable type 6.9 Standard Telephone Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 258 10.8 V to 13.2 V voltage (DC) Maximum output current RPS power supply Not supported PoE power supply Supported Power consumption Maximum power 12 W consumption Heat dissipation Fan module None Airflow Interface density Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 259 Table 3-219 lists the mapping between the AR509GW-L-D-H router and software versions. Table 3-219 Mapping between the AR509GW-L-D-H router and software version Router Model Software Version AR509GW-L-D-H V200R007C02, V200R008C50 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 260 LAN interfaces: four GE electrical interfaces NOTE l GE0 is a management interface and is used to upgrade the router. l All GE LAN interfaces can be configured as WAN interfaces. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 261 PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. 11 USB interface (host) 12 Two Wi-Fi antenna interfaces Indicator Description Figure 3-59 shows the indicators on the AR509GW-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 262 Slow blinking green: The system is running properly. Fast blinking green: The system is being powered on or is restarting. Steady red: A system fault has occurred and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 263 Steady on: A link has been established on the VDSL interface. Blinking: Data is being transmitted or received on the VDSL interface. Off: No link is established on the VDSL interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 264 A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-221 lists GE electrical interface attributes. Table 3-221 GE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 265: Cable Type

    LTE signals. Table 3-223 lists LTE antenna interface attributes. Table 3-223 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 266: Vdsl Interface

    VDSL interface. Table 3-224 VDSL interface attributes Attribute Description Connector type RJ11 Standards l ITU-T G.993.2 compliance l ITU-T G.992.5 l ITU-T G.992.3 l ITU-T G.992.1 G.DMT l ANSI T1.413 Issue 2 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 267: Adsl2+ Full Rate Mode (Itu-T G.992.5): Downlink Rate Of

    WLAN security Cable type 6.3.10 Wi-Fi Antenna Heat Dissipation The AR509GW-L-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-226 lists the technical specifications of the AR509GW-L-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 268 Supported Power consumption Maximum power 12 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management 1 (RJ45) interfaces CON/RS232 1 (RJ45) interfaces USB 2.0 interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 269 Table 3-227 Mapping between the AR511GW-LAV2M3 router and software versions Router Model Software Version AR511GW-LAV2M3 V200R005C30 and later versions Appearance and Structure Figure 3-60 shows the appearance of the AR511GW-LAV2M3 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 270 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 271 Figure 3-61 Indicators on the AR511GW-LAV2M3 WWAN RSSI MODE WLAN1 WLAN2 GE 0 GE 1 RE SE T CO NS OL m icr o SD OT G 10 11 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 272 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 273 Two audio outputs and one audio input Cable type Audio cable Video Interface A video interface supports three formats of video outputs: HDMI, CVBS, and YPrPb. Table 3-229 lists attributes of a video interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 274 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards compliance and l FDD LTE: bands 1/2/3/5/7/8/20 frequency bands supported l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8 l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 275 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-233 lists GE electrical interface attributes. Table 3-233 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 276 Table 3-235 lists attributes of a Micro USB interface. Table 3-235 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Standards compliance USB2.0 Working mode Wi-Fi Antenna Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 277 Specification System parameters Processor Quad-core, 1.2 GHz Memory 2 GB Nand Flash 2 GB EMMC Flash 4 GB Micro SD card None (default: sd1) Hard disk Not supported Dimensions and weight Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 278 WAN interfaces: two GE electrical interfaces and two 3G/LTE (standard antenna interfaces configuration) LAN interfaces: two Wi-Fi antenna interfaces Multimedia service interfaces: one GPS antenna interface, one audio interface, and two video interfaces Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 279 Table 3-238 Mapping between the AR511CGW-LAV2M3 router and software versions Router Model Software Version AR511CGW-LAV2M3 V200R006C15 and later versions Appearance and Structure Figure 3-62 shows the appearance of the AR511CGW-LAV2M3 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 280 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 281 Figure 3-63 Indicators on the AR511CGW-LAV2M3 WWAN RSSI MODE WLAN1 WLAN2 GE 0 GE 1 RE SE T CO NS OL m icr o SD OT G 10 11 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 282 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 283 Two audio outputs and one audio input Cable type Audio cable Video Interface A video interface supports three formats of video outputs: HDMI, CVBS, and YPrPb. Table 3-240 lists attributes of a video interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 284 SMA-K (screw threads outside and a hole inside) Standards l FDD LTE: bands 1/3/8 compliance and l TDD LTE: bands 38/39/40/41 frequency bands l HSPA+: bands 1/2/5/8 supported l TD-SCDMA: bands 34/39 l GSM/GPRS/EDGE: 900/1800/1900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 285 Table 3-243 GPS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported 1575 MHz Cable type GPS+LTE remote diversity antenna GE Electrical Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 286 USB Interface (OTG) A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-246 lists attributes of a Micro USB interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 287 The AR511CGW-LAV2M3 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-248 lists the technical specifications of the AR511CGW-LAV2M3 router. Table 3-248 AR511CGW-LAV2M3 technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 288 Not supported Power consumption Maximum power 30 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management None interfaces Console interfaces 1 (Micro USB) USB 2.0 interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 289 Table 3-249 Mapping between the AR511GW-LM7 router and software versions Router Model Software Version AR511GW-LM7 V200R005C31 and later versions Appearance and Structure Figure 3-64 shows the appearance of the AR511GW-LM7 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 290 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. Micro SD card slot 10 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 291 Figure 3-65 Indicators on the AR511GW-LM7 WWAN RSSI MODE WLAN1 WLAN2 G E0 RE SE T CO NS O LE m icr o SD SA TA O TG 10 11 micro SD RESET SATA CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 292 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 293 Micro USB data cable 3G/LTE Antenna Interface 3G/LTE antenna interfaces of a router include a primary antenna interface and a diversity antenna interface. The primary antenna interface receives and transmits 3G/LTE signals, and Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 294 GPS+LTE remote diversity antenna GE Electrical Interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-253 lists GE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 295 A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-255 lists attributes of a Micro USB interface. Table 3-255 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Standards compliance USB2.0 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 296 Attachment (mSATA) hard disk to provide a large storage space. Table 3-257 lists attributes of the mSATA interface. Table 3-257 mSATA interface attributes Attribute Description Connector type USB3.0 Standards compliance l AHCI l NCQ Hard disk type mSATA hard disk Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 297 8 V DC to 36 V DC voltage (DC) Maximum output current RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 25 W consumption Heat dissipation Fans None Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 298 Table 3-259 lists the mapping between the AR511GW-L-B3 router and software versions. Table 3-259 Mapping between the AR511GW-L-B3 router and software versions Router Model Software Version AR511GW-L-B3 V200R005C32 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 299 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 300 Figure 3-67 Indicators on the AR511GW-L-B3 WWAN RSSI MODE WLAN1 WLAN2 GE 0 RE SE T CO NS OL m icr o SD OT G 10 11 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 301 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE, 3G, or 2G connection is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 302 Two audio outputs and one audio input Cable type Audio cable Video Interface A video interface supports three formats of video outputs: HDMI, CVBS, and YPrPb. Table 3-261 lists attributes of a video interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 303 Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Standards compliance and l FDD LTE: bands 1/2/3/5/7/8/20 frequency bands supported l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8 l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 304 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-265 lists GE electrical interface attributes. Table 3-265 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 305 Table 3-267 lists attributes of a Micro USB interface. Table 3-267 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Standards compliance USB2.0 Working mode Wi-Fi Antenna Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 306 All channels in the ultra high frequency (UHF) band Standards compliance GB20600-2006 Cable type DTMB remote antenna Heat Dissipation The AR511GW-L-B3 router has no fans and uses natural heat dissipation. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 307 (DC) Maximum output current RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 30 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 308 Table 3-271 describes the mapping between the AR511EGW-LcAV2 router and software versions. Table 3-271 Mapping between the AR511EGW-LcAV2 router and software versions Router Model Software Version AR511EGW-LcAV2 V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 309 The router must use industrial SIM cards. l The mounting hole above the SIM card slots is used to fix the SIM card cover with a screw. 11 Micro SD card slot 12 CONSOLE interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 310 MODE GPS/BDS WLAN1 WLAN2 G E0 US B0 RE SE T US B1 CO NS O LE m icr o SD O TG 10 11 USB1 USB0 micro SD RESET CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 311 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE/3G/2G connection is established. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 312 Two audio outputs and one audio input Cable type Audio cable Video interface A video interface supports two formats of video outputs: HDMI and CVBS. Table 3-273 lists video interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 313 LTE (FDD): bands 1/3/8; LTE (TDD): Standards compliance and frequency bands supported bands 39/40/41 (38), all bands with diversity l DC-HSPA+: bands 1/9/5/8; TDS: bands 34/39, all bands with diversity l GSM: 1800/900 (MHz) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 314 Table 3-276 GPS/BDS antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Frequency bands supported l GPS: 1575.42 MHz l BDS: 1561.098 MHz Cable type 6.3.15 GPS/BDS Remote Antenna Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 315 USB interface (OTG) A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-279 lists attributes of a Micro USB interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 316 Cable type 6.3.13 Wi-Fi Rod Remote Antenna Heat Dissipation The AR511EGW-LcAV2 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-281 lists technical specifications of the AR511EGW-LcAV2 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 317 Maximum output current RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 40 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 318 Table 3-282 Mapping between the AR513W-V3M8 router and software versions Router Model Software Version AR513W-V3M8 V200R005C32 and later versions Appearance and Structure Figure 3-70 shows the appearance of the AR513W-V3M8 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 319 6.8 Ground Cable. 11 RS485 interface 12 Audio interface (output) NOTE The router does not support RS485 serial interface functions. This interface is reserved for future use. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 320 Exercise caution when deciding to press this button. Indicator Description Figure 3-71 shows the indicators on the AR513W-V3M8 router. Figure 3-71 Indicators on the AR513W-V3M8 RS485 RESET USB0 AUDIO Output (OTG) CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 321 7 and 8 GE electrical Yellow ACT indicator blinking: Data is being interface transmitted or received. indicators: ACT indicator off: No data is being transmitted l 7: ACT or received. indicator Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 322 Audio Interface (Output) An audio interface provides one stereo audio output. Table 3-285 lists attributes of an audio interface. Table 3-285 Audio interface attributes Attribute Description Connector type 3.5 mm headset jack Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 323 A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-288 lists GE electrical interface attributes. Table 3-288 GE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 324 A USB interface provides up to 480 Mbit/s upload and download rates. Table 3-290 lists attributes of a USB interface. Table 3-290 USB interface attributes Attribute Description Connector type Type A Standards compliance USB2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 325 Cable type 6.3.13 Wi-Fi Rod Remote Antenna Heat Dissipation The AR513W-V3M8 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-293 lists the technical specifications of the AR513W-V3M8 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 326 RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 30 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management None interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 327 AR513GW-LcV1 router and software versions. Table 3-294 Mapping between the AR513GW-LcV1 router and software versions Router Model Software Version AR513GW-LcV1 V200R007C00 Appearance and Structure Figure 3-72 shows the appearance of the AR513GW-LcV1 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 328 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 329 Hardware Description 13 LTE antenna interface 14 This interface is reserved for future use. Indicator Description Figure 3-73 shows indicators on the AR513GW-LcV1. Figure 3-73 Indicators on the AR513GW-LcV1 (OTG) CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 330 Off: No LTE/3G/2G signal is available. MODE Green Steady on: An LTE connection has been established. Slow blinking: A 3G/2G connection has been established. Off: No LTE/3G/2G connection is established. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 331 A high definition multimedia interface (HDMI) interface provides HDMI video output. Table 3-295 lists HDMI interface attributes. Table 3-295 HDMI interface attributes Attribute Description Connector type HDMI connector Signal types supported HDMI signal Cable type HDMI Video Cable Console interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 332 Network protocol Cable type 6.6 Ethernet Cable FE electrical interface An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-298 lists FE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 333 A USB interface (OTG) is also called a Micro USB interface. It can connect to an operation terminal for onsite configuration. Table 3-300 lists attributes of a Micro USB interface. Table 3-300 Micro USB interface attributes Attribute Description Connector type Micro USB, B socket Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 334 LTE signals. Table 3-302 lists LTE antenna interface attributes. Table 3-302 LTE antenna interface attributes Attribute Description Connector type SMA-K (screw threads outside and a hole inside) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 335 The AR513GW-LcV1 router has no fans and uses natural heat dissipation. Technical Specifications Table 3-303 lists technical specifications of the AR513GW-LcV1 router. Table 3-303 AR513GW-LcV1 technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 336 RPS power supply Not supported PoE power supply Not supported Power consumption Maximum power 21.5 W consumption Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management None interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 337 AR513W-V1 router and software versions. Table 3-304 Mapping between the AR513W-V1 router and software versions Router Model Software Version AR513W-V1 V200R007C00 Appearance and Structure Figure 3-74 shows the appearance of the AR513W-V1 router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 338 To restore the factory settings, hold down the button for at least 5 seconds. l To reset the system, press the button. Resetting the router will interrupt services. Exercise caution when deciding to press this button. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 339 Steady on: The system power supply is normal. Off: The system power is off. Red and Slow blinking green: The system is running green properly. Fast blinking green: The system is powering on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 340 Green LINK indicator steady on: A link has been l 9: LINK established on the interface. indicator LINK indicator off: No link is established on the interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 341 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-307 lists GE electrical interface attributes. Table 3-307 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 342 MDI. MDIX interfaces are usually used on hubs or LAN switches. Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable USB interface (host) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 343 RP-SMA-K (screw threads outside and a pin inside) Standards compliance 802.11a/b/g/n l 2.4 GHz Frequency bands supported l 5.0 GHz Rate 600 Mbit/s MIMO mode (Tx x Rx) Gain 2.15 dBi Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 344 275.0 mm x 180.0 mm x 40.0 mm (10.9 in. x 7.1 in. x 1.6 in.), 1 U D x H) height Weight 1.6 kg (3.53 lb) Power specifications Rated input voltage 12 V (DC) Maximum input 11.4 V DC to 12.6 V DC voltage (DC) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 345 1°C every time the altitude increases by 220 m. Storage –40°C to +85°C (-40°F to + 185°F) temperature Operating relative 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02351GEY Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 346 DC power cable to supply power to the PD. WAN interfaces: four GE electrical LAN interfaces: four GE electrical interfaces interfaces NOTE GE0 is a management interface and is used to upgrade the router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 347 16 Console interface 17 USB interface (host) 18 Hard disk lock 19 Pluggable disk enclosure Indicator Description Figure 3-77 shows the indicators on the AR515GW-LM9-D series routers. Figure 3-77 Indicators on the AR515GW-LM9-D Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 348 Green Steady on: The 3G/2G signal strength is high. Fast blinking: The 3G/2G signal strength is medium. Slow blinking: The 3G/2G signal strength is low. Off: No 3G/2G signal is available. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 349 LTE Antenna Interface LTE antenna interfaces of a router include a primary antenna interface and a diversity antenna interface. The primary antenna interface receives and transmits LTE signals, and the diversity Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 350 GE Electrical Interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-317 lists attributes of a GE electrical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 351 A high definition multimedia interface (HDMI) interface provides HDMI video output. Table 3-319 lists HDMI interface attributes. Table 3-319 HDMI interface attributes Attribute Description Connector type HDMI connector Signal types supported HDMI signal Cable type HDMI Video Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 352 Cable type 6.3.14 Wi-Fi Strip-Shaped Remote Antenna Heat Dissipation The AR515GW-LM9-D router has no fans and uses natural heat dissipation. Technical Specifications Table 3-322 lists the technical specifications of the AR515GW-LM9-D routers. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 353 The maximum power consumption is 42 W and the output voltage is 30W (12 V, 2.5 A). Heat dissipation Fans None Airflow (facing the None front panel) Interface density Management 1 (M12) interfaces Console interfaces 1 (DB9) USB 2.0 interfaces USB 3.0 interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 354 Table 3-323 Mapping between the AR515CGW-L router and software versions Router Model Software Version AR515CGW-L V200R009C00SPC301 and later versions Appearance and Structure Figure 3-78 shows the appearance of the AR515CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 355 NOTE NOTE It can have a DB25 adapter cable connected l 12 V output to provide any of the following interfaces: l 5 V output l VAG l AV audio/video interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 356 NOTE This port is used to connect to a PC through a double USB cable to transmit hard disk data. Indicator Description Figure 3-79 shows indicators on the AR515CGW-L router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 357 USB flash drive. Blinking green: The system is being upgraded or configured using a USB flash drive. Steady red: The system fails to be upgraded or configured using a USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 358 Off: No hard disk is connected to the router. Interface Description Console interface The console interface of a router can connect to an operation terminal for onsite configuration. Table 3-324 lists attributes of the console interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 359 5.76 Mbit/s and downlink rate of 42 Mbit/s l Frequency Division Duplex-Long Term Evolution (FDD LTE): uplink rate of 50 Mbit/s and downlink rate of 150 Mbit/s Cable type 6.3.5 LTE Strip-shaped Remote Antenna GPS/BDS antenna interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 360 IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocols Cable type M12 cable VGA interface A video graphics array (VGA) interface provides VGA video output. Table 3-328 lists VGA interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 361 A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data. Table 3-331 lists Wi-Fi antenna interface attributes. Table 3-331 Wi-Fi antenna interface attributes Attribute Description Connector type RP-SMA-K (screw threads outside and a pin inside) Standards compliance 802.11a/b/g/n/ac Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 362 1.0 g (0 to peak). Dimensions and weight Dimensions (W x 217.0 mm x 178.0 mm x 100.0 mm (8.54 in. x 7.01 in. x 3.94 in.) D x H) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 363 LAN interfaces: three Wi-Fi antenna interfaces and one GPS antenna interface Multimedia service interfaces: one VGA interface, one MIC interface, one AV audio/video interface, one pluggable hard disk cartridge Extended slots Not supported Environment parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 364 Table 3-333 Mapping between the AR531-2C-H router and software versions Device Model Software Version AR531-2C-H V200R005C60 and later versions NOTE This model does not match V200R008C00. Appearance and Structure Figure 3-80 shows the appearance of the AR531-2C-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 365 AC power socket USB interface NOTE l It is connected to an AC power supply device using a 4-pin AC power cable. l The router supports Huawei 4.9 180 W Midspan. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 366 11 Ground point NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-81 shows indicators on the AR531-2C-H. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 367 Infrared This interface is used to transmit and receive infrared — communi signals (invisible light). cation interface Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 368 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 369 MDI. MDIX interfaces are usually used on hubs or LAN switches. Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP Network protocol Cable type 6.6 Ethernet Cable FE combo interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 370 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-338 lists USB interface attributes. Table 3-338 USB interface attributes Attribute Description Connector type TYPE-A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 371 Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) Heat Dissipation The AR531-2C-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-341 lists technical specifications of the AR531-2C-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 372 -40°C to +85°C (-40°F to +185°F) Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 373 Figure 3-82 shows the panel of the AR531-F2C-H. Figure 3-82 AR531-F2C-H panel Power outage Survival MONITOR CONSOLE RS485-0 RS485-1 DI-0 DI-1 10 11 LAN interfaces: six FE optical interfaces 2 USB interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 374 NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-83 shows the indicators on the AR531-F2C-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 375 Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 376 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 377: Table

    A GE optical interface transmits and receives Ethernet services at 1000 Mbit/s. Table 3-345 lists GE optical interface attributes. Table 3-345 GE optical interface attributes Attribute Description Connector type Standards compliance IEEE802.3z Rate 1000 Mbit/s Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 378 Table 3-347 RS485 interface attributes Attribute Description Connector type 8-pin connector (leftmost 4 pins for RS485 interfaces) Standards compliance RS485 Working mode Half-duplex Rate 1200-115200 bit/s Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) DI Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 379 The AR531-F2C-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-350 lists technical specifications of the AR531-F2C-H router. Table 3-350 AR531-F2C-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 380 Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Part number 50010173 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 381: Figure

    AR531GPe-U-H. Figure 3-84 AR531GPe-U-H panel CONSOLE SIM1 SIM2 MONITOR RESERVE RS485-0 RS485-1 DI-0 DI-1 3G antenna interface Console interface NOTE The interface marked RESERVE is a reserved console interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 382 NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-85 shows the indicators on the AR531GPe-U-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 383 Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 384 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 385 An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-354 lists FE electrical interface attributes. Table 3-354 FE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 386 Optical fiber (inserted in an optical module) and GE Optical Module 6.6 Ethernet Cable GE Copper Module USB Interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 387 Attribute Description Connector type 8-pin connector (rightmost 4 pins for DI interfaces) Signal type Passive DI signals, Boolean value (short circuit and open circuit) Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 388 The AR531GPe-U-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-360 lists technical specifications of the AR531GPe-U-H router. Table 3-360 AR531GPe-U-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 389 1.5 hours before they are powered on, the 3G module can work normally 20 minutes after startup. Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 390 AR531GR-U-H. Figure 3-86 AR531GR-U-H panel CONSOLE ZigBee/sub-GHz SIM1 SIM2 MONITOR RESERVE RS485-0 RS485-1 DI-0 DI-1 3G antenna interface Console interface NOTE The interface marked RESERVE is a reserved console interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 391 The router must be reliably grounded using a used as WAN interfaces. ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-87 shows the indicators on the AR531GR-U-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 392 Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Green Steady on: The router is powered on. Off: The router is powered off. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 393 Fast blinking: The RS485-1 link is available and is transmitting and receiving data. l Off: The RS485-1 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 394 Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable FE Electrical Interface An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-364 lists FE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 395 Description Connector type Standards compliance IEEE802.3z Rate 1000 Mbit/s Cable type l Optical fiber (inserted in an optical module) and GE Optical Module 6.6 Ethernet Cable GE Copper Module USB Interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 396 DI interfaces are used to observe remote communication input and voltage level signals. Table 3-368 lists DI interface attributes. Table 3-368 DI interface attributes Attribute Description Connector type 8-pin connector (rightmost 4 pins for DI interfaces) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 397 Antenna type 6.3.1 3G Whip Antenna ZigBee antenna interface The ZigBee antenna interface connects to a ZigBee antenna to transmit and receive wireless data. Table 3-370 lists ZigBee antenna interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 398 Data transmission Antenna type 6.3.22 sub-GHz Antenna Heat Dissipation The AR531GR-U-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-372 lists technical specifications of the AR531GR-U-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 399 3G antenna interfaces ZigBee/Sub-GHz antenna interfaces Service interfaces (standard configuration) l LAN interfaces: six FE electrical interfaces l Two GE optical interfaces Environment parameters Storage temperature -40°C to +85°C (-40°F to +185°F) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 400 12 V; 6 A or 12 V; 6 A or 24 V; 3 A or 24 V; 3 A or -48 V; 4 A -48 V; 4 A NEG(-) RTN(+) NEG(-) RTN(+) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 401 Resetting the system will interrupt services. Exercise caution when performing this operation. 11 Ground point NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 402 RS485-1 3G/2G Table 3-374 Description of the indicators on the AR531G-U-D-H Indicato Color Description r/Button Infrared This port is used to transmit and receive infrared signals communi (invisible light). cation port Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 403 Fast blinking: The RS485-0 link is available and is transmitting and receiving data. l Off: The RS485-0 link is not configured or has failed. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 404 An FE electrical interface receives and transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-376 lists FE electrical interface attributes. Table 3-376 FE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 405 Optical fiber (inserted in an optical module) and GE Optical Module 6.6 Ethernet Cable GE Copper Module USB Interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 406 Attribute Description Connector type 8-pin connector (rightmost 4 pins for DI interfaces) Signal type Passive DI signals, Boolean value (short circuit and open circuit) Cable type 6.2.11 8-Pin Phoenix Connector (RS485/DI) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 407 Heat Dissipation The AR531G-U-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-382 lists technical specifications of the AR531G-U-D-H. Table 3-382 AR531G-U-D-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 408 1.5 hours before they are powered on, the 3G module can work normally 20 minutes after startup. Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 409 Table 3-383 Mapping between the AR550-8FE-D-H router and software versions Router Model Software Version AR550-8FE-D-H V200R005C70, V200R009C00 and later versions Appearance and Structure Figure 3-90 shows the panel of the AR550-8FE-D-H. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 410 GE0 through GE3 are uplink interfaces. USB interface Console interface DO interface Two DC power sockets NOTE The router supports Huawei 4.5 60 W Industrial AC Power Module 4.9 180 W Midspan. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 411 The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-91 shows the indicators on the AR550-8FE-D-H router. Figure 3-91 Indicators on the AR550-8FE-D-H Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 412 Steady on: The corresponding LAN FE interface interface is in Link-Up state. indicators l Off: The corresponding LAN FE interface is in Link-Down state. l Blinking: The corresponding LAN FE interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 413 The console interface can connect to an operation terminal for onsite configuration. Table 3-385 lists console interface attributes. Table 3-385 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 414 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-387 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 415 Cable type 6.2.2 3-Pin Phoenix Connector (DO) Heat Dissipation The AR550-8FE-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-389 lists technical specifications of the AR550-8FE-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 416 24 hours in a temperature range of -45°C to +75°C (-31°F to +167°F). Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 417 Table 3-390 Mapping between the AR550-24FE-D-H router and software versions Router Model Software Version AR550-24FE-D-H V200R005C70, V200R009C00 and later versions Appearance and Structure Figure 3-92 shows the panel of the AR550-24FE-D-H. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 418 Figure 3-92 Panel of the AR550-24FE-D-H LAN interfaces: 24 FE electrical LAN interfaces: four GE combo interfaces interfaces NOTE NOTE FE0 is an uplink interface. GE0 through GE3 are uplink interfaces. USB interface Console interface Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 419 The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Indicator Description Figure 3-93 shows the indicators on the AR550-24FE-D-H router. Figure 3-93 Indicators on the AR550-24FE-D-H Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 420 Steady on: The corresponding LAN FE interface interface is in Link-Up state. indicators l Off: The corresponding LAN FE interface is in Link-Down state. l Blinking: The corresponding LAN FE interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 421 The console interface can connect to an operation terminal for onsite configuration. Table 3-392 lists console interface attributes. Table 3-392 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 422 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-394 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 423 Cable type 6.2.2 3-Pin Phoenix Connector (DO) Heat Dissipation The AR550-24FE-D-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-396 lists technical specifications of the AR550-24FE-D-H router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 424 24 hours in a temperature range of -45°C to +75°C (-31°F to +167°F). Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 425 Table 3-397 Mapping between the AR550C-4GE router and software versions Router Model Software Version AR550C-4GE V200R008C30 and later versions Appearance and Structure Figure 3-94 shows the appearance of the AR550C-4GE router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 426 Industrial AC Power Module 4.10 240 interference, reliably ground the router using W AC PoE Power Module. 6.8 Ground Cable. Console interface USB interface Indicator Description Figure 3-95 shows indicators on the AR550C-4GE. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 427 When a USB flash drive is connected to the router, the RUN indicator works as the USB indicator: l Steady on: USB-based deployment has been completed. l Fast blinking: The system is being upgraded using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 428 Table 3-398 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 429 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-400 lists USB interface attributes. Table 3-400 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 430 The AR550C-4GE router has no fans and uses natural heat dissipation. Technical Specifications Table 3-403 lists technical specifications of the AR550C-4GE router. Table 3-403 AR550C-4GE technical specifications Item Specification System parameters Processor Dual-core, 700 MHz Memory 256 MB Flash 512 MB Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 431 -40°C to +85°C (-40°F to +185°F) Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Part number 50010300 3.5.4 AR550C-2C6GE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 432 AR550C-2C6GE router. Figure 3-96 AR550C-2C6GE appearance MGMT PoE++ 0-1 PoE+ 2-7 DC1 DC2 RS485 D+ D- SG 54 V; 7.2 A 12-48 V; 1.5-0.4 A CONSOLE Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 433 6.8 Ground Cable. l The router supports Huawei 4.10 240 W AC PoE Power Module. Console interface 10 USB interface Indicator Description Figure 3-97 shows indicators on the AR550C-2C6GE. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 434 RUN indicator works as the USB indicator: l Steady on: USB-based deployment has been completed. l Fast blinking: The system is being upgraded or configured using the USB flash drive. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 435 The console interface can connect to an operation terminal for onsite configuration. Table 3-405 lists console interface attributes. Table 3-405 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 436 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-407 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 437 2.5GE optical interface A 2.5GE optical interface supports GE/2.5GE auto-sensing and is used for data transmission and receiving at over 1 Gbit/s. Table 3-409 lists the attributes of a 2.5GE optical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 438 Flash 512 MB Dimensions and weight Dimensions (W x D x H) 150 mm x 133 mm x 44 mm (5.91 in. x 5.24 in. x 1.73 in.), 1 U height Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 439 Operating temperature -40°C to +70°C (-40°F to +158°F) Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Part number 50010301 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 440 Table 3-412 Mapping between the AR550C-2C6GE-2D router and software versions Device Model Software Version AR550C-2C6GE-2D V200R009C00 and later versions Appearance and Structure Figure 3-98 shows the appearance of the AR550C-2C6GE-2D router. Figure 3-98 AR550C-2C6GE-2D appearance Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 441 To protect the router from lightning and interference, reliably ground the router using 6.8 Ground Cable. USB interface 10 - Indicator Description Figure 3-99 shows indicators on the AR550C-2C6GE-2D. Figure 3-99 Indicators on the AR550C-2C6GE-2D Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 442 Steady on: A link has been established. interface Blinking: Data is being transmitted over the link. indicators Off: No link is established or no data is being (GE6 to transmitted on the link. GE7) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 443 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-414 lists GE electrical interface attributes. Table 3-414 GE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 444 Connector type TYPE-A Standards compliance USB 2.0 Working mode Host GE optical interface A GE optical interface transmits and receives Ethernet services at 1000 Mbit/s. Table 3-416 lists GE optical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 445 A DI interface receives alarm input (9.6-60 V), and a DO interface sends output signals to instruct an external device to perform required actions. Table 3-418 lists the DI/DO interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 446 – Maximum voltage range: 44 V DC to 57 V DC l DC power input (PoE enabled): – Rated voltage: 56 V DC – Maximum voltage range: 54 V DC to 57 V DC Alarm output Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 447 Table 3-420 Mapping between the AR550E router and software versions Device Model Software Version AR550E V200R009C00 and later versions Appearance and Structure Figure 3-100 shows the appearance of the AR550E router. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 448 7 Two DC power sockets Two PoE power jacks NOTE NOTE The router supports Huawei 4.5 60 W The router supports Huawei 4.10 240 W AC Industrial AC Power Module. PoE Power Module. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 449 Table 3-421 Description of indicators on the AR550E Indicato Color Description r/Button Red and Slow blinking green: The system is running properly. green Fast blinking green: The system is powering on or restarting. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 450 Green indicator steady on: A link has been electrical Yellow established on the interface. interface l Green indicator off: No link is established on the indicators interface. (GE0 to GE7) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 451 6.18 Console Cable GE electrical interface A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 3-423 lists GE electrical interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 452 10GE optical interface A 10GE optical interface supports GE/10GE auto-sensing and can send and receive data at 1 Gbit/s or 10 Gbit/s. Table 3-425 describes the attributes of a 10GE optical interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 453 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-427 lists USB interface attributes. Table 3-427 USB interface attributes Attribute Description Connector type TYPE-A Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 454 Dimensions (W x D x H) 175 mm x 133 mm x 150 mm (6.89 in. x 5.24 in. x 5.91 in.) Weight 3 kg (6.61 lb) Power consumption Maximum power consumption 45 W Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 455 -45°C to +70°C (-49°F to +158°F). Operating relative humidity 5% to 95%, noncondensing Operating altitude ≤ 5000 m (16404 ft.) Storage altitude ≤ 5000 m (16404 ft.) Part number 50010409 3.6 AR1500 Series Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 456 6.8 Ground Cable. Reset button USB interface NOTE l This button is used to reset the router. l Resetting the system will interrupt services. Exercise caution when performing this operation. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 457 Steady on: There are alarm output signals. Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 458 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-433 lists FE electrical interface attributes. Table 3-433 FE electrical interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 459 100 Mbit/s Network protocols Cable type Optical fiber (inserted in an optical module) USB interface Do not remove the USB flash drive during a USB-based deployment. Otherwise, the system will restart. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 460 The ETH interface is used to log in to the router to perform configuration and management. Table 3-437 lists ETH interface attributes. Table 3-437 ETH interface attributes Attribute Description Connector type RJ45 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 461 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 3.8 kg (8.38 lb) chassis) Power consumption (empty chassis) Typical power 13.5 W consumption Maximum power 15.2 W consumption Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 462 Table 3-439 describes the mapping between the AR1504-16S8T router and software versions. Table 3-439 Mapping between the AR1504-16S8T router and software versions Device Model Software Version AR1504-16S8T V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 463 Exercise caution when performing this operation. ETH interface Console interface NOTE An ETH interface is a management interface used to upgrade the router. Indicator Description Figure 3-105 shows indicators on the AR1504-16S8T. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 464 Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 465 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-442 lists FE electrical interface attributes. Table 3-442 FE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 466 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-444 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 467 The ETH interface is used to log in to the router to perform configuration and management. Table 3-446 lists ETH interface attributes. Table 3-446 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 468 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 3.9 kg (8.60 lb) chassis) Power consumption (empty chassis) Typical power 15 W consumption Maximum power 17.3 W consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 469 Table 3-448 describes the mapping between the AR1504-24S router and software versions. Table 3-448 Mapping between the AR1504-24S router and software versions Device Model Software Version AR1504-24S V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 470 USB interface ETH interface NOTE An ETH interface is a management interface used to upgrade the router. Console interface Indicator Description Figure 3-107 shows indicators on the AR1504-24S. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 471 Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 472 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-451 lists FE electrical interface attributes. Table 3-451 FE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 473 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-453 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 474 The ETH interface is used to log in to the router to perform configuration and management. Table 3-455 lists ETH interface attributes. Table 3-455 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 475 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 4.1 kg (9.04 lb) chassis) Power consumption (empty chassis) Typical power 15.5 W consumption Maximum power 20.65 W consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 476 Table 3-457 describes the mapping between the AR1504-24T router and software versions. Table 3-457 Mapping between the AR1504-24T router and software versions Device Model Software Version AR1504-24T V200R009C00 and later versions Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 477 USB interface ETH interface NOTE An ETH interface is a management interface used to upgrade the router. Console interface Indicator Description Figure 3-109 shows indicators on the AR1504-24T. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 478 Green l Steady on: The interface is in Link-Up state. interface l Off: The interface is in Link-Down state. indicator l Blinking: The interface is transmitting or receiving data. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 479 An FE electrical interface transmits Ethernet services at 10 Mbit/s or 100 Mbit/s. Table 3-460 lists FE electrical interface attributes. Table 3-460 FE electrical interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 480 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-462 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 481 The ETH interface is used to log in to the router to perform configuration and management. Table 3-464 lists ETH interface attributes. Table 3-464 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE 802.3 l IEEE 802.3u l IEEE 802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 482 442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.) D x H) Weight (empty 3.7 kg (8.16 lb) chassis) Power consumption (empty chassis) Typical power 10.22 W consumption Maximum power 13.38 W consumption Power specifications Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 483 5% to 95%, noncondensing humidity Operating altitude ≥ 5000 m (16404 ft.) Part number 50010400 3.7 AR2500 Series 3.7.1 AR2504-H Version Mapping Table 3-466 lists the mapping between the AR2504-H routers and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 484 Ground point Two power sockets NOTE The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Reserved DO interface Four GE electrical interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 485 Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. Green l Off: There are no alarm output signals. l Steady on: There are alarm output signals. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 486 Table 3-468 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 487 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-470 lists USB interface attributes. Table 3-470 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 488 The ETH interface is used to log in to the route to perform configuration and management. Table 3-472 lists the attributes of the ETH interface. Table 3-472 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE802.3 l IEEE802.3u l IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 489 (19.0 in. x 17.4 in. x 1.7 in.), 1 U height Weight (empty 7 kg (15.4 lb) chassis) Power consumption (empty chassis) Typical power 15 W consumption Maximum power 25 W consumption Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 490 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02350KKH 3.7.2 AR2504-D-H Version Mapping Table 3-474 lists the mapping between the AR2504-D-H router and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 491 Resetting the system will interrupt services. Exercise caution when performing this operation. Ground point Two DC power sockets NOTE To protect the router from lightning and interference, reliably ground the router using a 6.8 Ground Cable. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 492 Fast blinking green: The system is powering on or is restarting. l Steady red: A fault that affects services has occurred on the card. The fault cannot be rectified automatically and requires manual intervention. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 493 The console interface can connect to an operation terminal for onsite configuration. Table 3-476 lists console interface attributes. Table 3-476 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 494 The USB interface supports USB 2.0 devices and provides upload and download speeds of 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-478 lists USB interface attributes. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 495 6.2.2 3-Pin Phoenix Connector (DO) ETH interface The ETH interface is used to log in to the route to perform configuration and management. Table 3-480 lists the attributes of the ETH interface. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 496 With mounting brackets installed: 482.0 mm x 420.0 mm x 44.4 mm (18.98 in. x 16.5 in. x 1.74 in.), 1 U height Weight (empty 7 kg (15.43 lb) chassis) Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 497 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02351AJM 3.7.3 AR2504E-H Version Mapping Table 3-482 lists the mapping between the AR2504E-H routers and software versions. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 498 The router must be reliably grounded using a ground cable to protect the router from lightning and electromagnetic interference. Reserved DO interface Four GE electrical interfaces Four GE combo interfaces LAN interface: Two 10GE optical interfaces Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 499 Steady red: A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. Green l Off: There are no alarm output signals. l Steady on: There are alarm output signals. Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 500 Table 3-484 Console interface attributes Attribute Description Connector type RJ45 Standards compliance RS232 Working mode Full-duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type Data circuit-terminating equipment (DCE) Cable type 6.18 Console Cable Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 501 480 Mbit/s. You can use the USB interface to upload or download configuration and application files to the flash memory. Table 3-486 lists USB interface attributes. Table 3-486 USB interface attributes Attribute Description Connector type TYPE-A Standards compliance USB 2.0 Working mode Host Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 502 The ETH interface is used to log in to the route to perform configuration and management. Table 3-488 lists the attributes of the ETH interface. Table 3-488 ETH interface attributes Attribute Description Connector type RJ45 Standards compliance l IEEE802.3 l IEEE802.3u l IEEE802.3ab Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 503 The AR2504E-H router has no fans and uses natural heat dissipation. Technical Specifications Table 3-490 lists technical specifications of the AR2504E-H router. Table 3-490 AR2504E-H technical specifications Item Specification System parameters Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 504 NOTE temperature In compliance with IEC60068-2-1-2007 and ETSI EN 300 019-2-3 V2.2.2:2003, the router can operate reliably for 24 hours in a temperature range of -40°C to +70°C (-40°F to +158F). Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.
  • Page 505 3 Chassis Hardware Description Item Specification Storage -40°C to +85°C (-40°F to +185°F) temperature Operating relative 5% to 95%, noncondensing humidity Operating altitude < 5000 m (16404 ft.) Part number 02350RBM Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd.

Table of Contents