Huawei AR500 Series Manual page 193

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
LTE antenna interfaces of a router include a MAIN interface (for the primary antenna) and a
DIV interface (for the secondary antenna). The primary and secondary antennas work
together. The primary antenna transmits and receives LTE signals, and the secondary antenna
helps improve the quality of received LTE signals.
attributes.
Table 3-166 LTE antenna interface attributes
Attribute
Connector type
Standards
compliance and
frequency bands
supported
Rate
Cable type
GPS antenna interface
A GPS antenna interface can connect to a GPS remote diversity antenna to provide the GPS
positioning function.
Table 3-167 GPS antenna interface attributes
Attribute
Connector type
Frequency bands supported
Issue 10 (2019-03-06)
Description
SMA-K (screw threads outside and a hole inside)
l LTE FDD: bands 1/2/3/4/5/7/8/20
l DC-HSPA+/HSPA+/HSPA/WCDMA: bands 1/2/5/8
l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz)
l General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s
and downlink rate of 85.6 kbit/s
l Enhanced Data Rates for GSM Evolution (EDGE): uplink rate of
236.8 kbit/s and downlink rate of 236.8 kbit/s
l Wideband Code Division Multiple Access circuit switched
(WCDMA CS): uplink rate of 64 kbit/s and downlink rate of 64
kbit/s
l WCDMA packet switched (PS): uplink rate of 384 kbit/s and
downlink rate of 384 kbit/s
l High Speed Packet Access Plus (HSPA+): uplink rate of 5.76
Mbit/s and downlink rate of 21.6 Mbit/s
l DC-HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 43.2
Mbit/s
l Frequency Division Duplexing (FDD) LTE: uplink rate of 50
Mbit/s and downlink rate of 150 Mbit/s
l 6.3.2 LTE Whip Antenna
l
6.3.4 Outdoor LTE Antenna
l 6.3.3 LTE Indoor Remote Antenna
Table 3-167 lists GPS antenna interface attributes.
Copyright © Huawei Technologies Co., Ltd.
Table 3-166 lists LTE antenna interface
Description
SMA-K (screw threads outside and a hole
inside)
1575 MHz
3 Chassis
264