Huawei AR500 Series Manual page 150

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
together. The primary antenna transmits and receives LTE signals, and the secondary antenna
helps improve the quality of received LTE signals.
attributes.
Table 3-128 LTE antenna interface attributes
Attribute
Connector type
Standards
compliance and
frequency bands
supported
Rate
Cable type
GPS/BDS antenna interface
A GPS/BDS antenna interface can connect to a GPS/BDS remote antenna to provide the
GPS/BDS positioning function.
interface.
Table 3-129 GPS/BDS antenna interface attributes
Attribute
Connector type
Frequency bands supported
Cable type
Issue 10 (2019-03-06)
Description
SMA-K (screw threads outside and a hole inside)
l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz)
l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8
l FDD LTE: bands 1/2/3/4/5/7/8/20
l General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s
and downlink rate of 85.6 kbit/s
l Enhanced Data Rates for GSM Evolution (EDGE): uplink rate of
236.8 kbit/s and downlink rate of 236.8 kbit/s
l Wideband Code Division Multiple Access circuit switched
(WCDMA CS): uplink rate of 64 kbit/s and downlink rate of 64
kbit/s
l WCDMA packet switched (PS): uplink rate of 384 kbit/s and
downlink rate of 384 kbit/s
l High Speed Packet Access Plus (HSPA+): uplink rate of 5.76
Mbit/s and downlink rate of 21.6 Mbit/s
l DC-HSPA+: uplink rate of 5.76 Mbit/s and downlink rate of 42
Mbit/s
l FDD LTE: uplink rate of 50 Mbit/s and downlink rate of 150
Mbit/s
6.3.5 LTE Strip-shaped Remote Antenna
Table 3-129
Copyright © Huawei Technologies Co., Ltd.
Table 3-128 lists LTE antenna interface
lists the attributes of a GPS/BDS antenna
Description
SMA-K (screw threads outside and a hole
inside)
l GPS: 1575.42 MHz
l BDS: 1561.098 MHz
6.3.15 GPS/BDS Remote Antenna
3 Chassis
221