Huawei AR500 Series Manual page 272

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Numbe
r
1
2
3
4
5
6
Issue 10 (2019-03-06)
Indicator Color
PWR Green
SYS Red and
green
USB Red and
green
WWAN Green
RSSI Green
MODE Green
Copyright © Huawei Technologies Co., Ltd.
Description
Steady on: The system power supply is normal.
Off: The system power is off.
Slow blinking green: The system is running
properly.
Fast blinking green: The system is being
powered on or restarting.
Steady red: A fault that affects services has
occurred. The fault cannot be rectified
automatically and requires manual intervention.
Off: The system software is not running or is
resetting.
Steady green: The system has been upgraded or
configured using a USB flash drive.
Blinking green: The system is being upgraded
or configured using a USB flash drive.
Steady red: The system fails to be upgraded or
configured using a USB flash drive.
Off: No USB flash drive is connected, the USB
interface has failed, or the indicator has failed.
Steady on: An LTE/3G/2G connection has been
established and is active.
Blinking: Data is being transmitted or received
over the LTE/3G/2G connection.
Off: The LTE/3G/2G connection has not been
established or is inactive.
Steady on: The LTE/3G/2G signal strength is
high.
Fast blinking: The LTE/3G/2G signal strength is
medium.
Slow blinking: The LTE/3G/2G signal strength
is low.
Off: No LTE/3G/2G signal is available.
Steady on: An LTE connection has been
established.
Slow blinking: A 3G/2G connection has been
established.
Off: No LTE, 3G, or 2G connection is available.
3 Chassis
343