Table - Huawei AR500 Series Manual

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Interface Description
Console Interface
The console interface can connect to an operation terminal for onsite configuration.
3-344
Table 3-344 Console interface attributes
Attribute
Connector type
Standards compliance
Working mode
Data equipment type
Cable type
FE Combo Interface
An FE combo interface consists of an optical Ethernet interface and an electrical Ethernet
interface on the panel. The two interfaces have only one internal forwarding interface. The
electrical and optical interfaces are multiplexed, and only one of them can work at a time.
When one of the Ethernet interfaces is working, the other interface is shut down.
l
l
NOTE
l In V200R008C30 and earlier versions, a combo interface works as an electrical interface and uses a
l In V200R008C50 and later versions, a combo interface works in auto mode and automatically works
GE Optical Interface
A GE optical interface transmits and receives Ethernet services at 1000 Mbit/s.
lists GE optical interface attributes.
Table 3-345 GE optical interface attributes
Attribute
Connector type
Standards compliance
Rate
Issue 10 (2019-03-06)
lists console interface attributes.
The FE electrical interface (10/100 Mbit/s auto-sensing) transmits and receives services
at 10 Mbit/s or 100 Mbit/s.
The FE optical interface (100 Mbit/s) transmits and receives services at 100 Mbit/s.
network cable to transmit and receive data by default.
as an optical or electrical interface by default.
Copyright © Huawei Technologies Co., Ltd.
Description
RJ45
RS232
Full-duplex Universal Asynchronous
Receiver/Transmitter (UART)
Data circuit-terminating equipment (DCE)
6.18 Console Cable
Description
SFP
IEEE802.3z
1000 Mbit/s
3 Chassis

Table

Table 3-345
448