Table of Contents
Advertisement
Chapter 2 Preparations
1.4.2 Removal
To remove the CPU, first remove the top cover, air duct, and HSBP bracket referring to Chapter 2 (1.3.1
Removal of top cover, 1.3.2 Removal of air duct, and 1.3.3 Removal of HSBP bracket ), and then perform the
steps 3 to 10 of Chapter 2 (1.4.1 Installation) in the reverse order. To remove the heat sink, slide it a little on
the level and remove it. See the second item of Important in below.
50
Important
•
Remove the CPU only when it is defected.
•
After operation, the cool sheet at the bottom of the heat sink may adhere to the
CPU. To remove the heat sink, first turn it left and right to detach it from the
CPU. If you remove the heat sink with the cool sheet adhering to the CPU, the
CPU and/or the socket may be damaged.
•
Put a socket cover on Processor #2 if it is equipped with no CPU.
•
The operation of the CPU blade cannot be secured if the CPU is installed only
on the Processor #2 socket.
•
To reinstall the CPU having been removed, the cool sheet should be replaced
with a new one. Contact you sales representative.
Express5800/B120e User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
