Table of Contents
Advertisement
Chapter 2 Preparations
3.
Hold the hard disk drive so that the lever on the drive faces upward and the BP connector faces the
CPU blade. Insert the hard disk drive into the slot slowly and gently.
4.
Insert the hard disk drive until it hits the slot end, and close the lever. A click occurs when the hard
disk drive is locked
1.7.2 Removal
To remove the Solid State Drive, reverse the installation procedure referring to Chapter 2 (1.7.1 Installation).
60
Important
•
Make sure that the lever hook is engaged with the frame.
Important
•
Be sure to install dummy SSD after the Solid State Drive is removed. If not, the
CPU blade may fail to work properly.
Express5800/B120e User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
