Table of Contents
Advertisement
Chapter 2 Preparations
1.5.3 Removal
To remove DIMMs, first remove the top cover, air duct, and HSBP bracket referring to Chapter 2 (1.3.1
Removal of top cover, 1.3.2 Removal of air duct, and 1.3.3 Removal of HSBP bracket ), and then perform
steps in Chapter 2 (1.5.2 Installation) in reverse order.
After DIMMs are removed, make sure that no error message appears in POST.
If any error messages are displayed, refer to Chapter 3 (1. Error Message of POST and Virtual LCD) in
"Maintenance Guide".
Run SETUP and select Yes after selecting Advanced → Memory Configuration → Memory Retest. Restart
the CPU blade to clear the error information of the removed DIMM (refer to Chapter 2 (1. System BIOS) in
"Maintenance Guide".).
Set the paging file size to a value larger than the recommended value (installed memory * 1.5) (for Windows).
Refer to the Installation Guide for more information.
54
Note
To remove the defective DIMM, check the error message appearing in POST or NEC
ESMPRO to confirm the CPU blade on which the defective DIMM is installed.
Express5800/B120e User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
