P
Smart Infrastructure
13.4.1.3.
Display of operating position
V
h min s
%
Basic Documentation LME7...
13 Operation via AZL2
Display oP: P1 means stage 1.
Display after oP is unit-specific.
Display oP: P2 means stage 2.
Display after oP is unit-specific.
Display oP: means modulating operation.
Display after oP: is unit-specific.
Display shows the relative value of the actual position of
actuator (51).
Position of actuator 0° = 0 value of potentiometer = 0%
display.
Position of actuator high-fire >0° = >0 <1000 value of
potentiometer = 100% display.
67/116
CC1P7105en
24.07.2020