Changing The Heating Engineer's Password - Siemens LME71 Series Basic Documentation


VSD
F A
>1 s
/reset
/reset
/reset
Smart Infrastructure
13.8.2

Changing the heating engineer's password

Note:
For the OEM to change the heating engineer's password, c: demands entry of the OEM
password!
Basic Documentation LME7...
13 Operation via AZL2
Press button combination
000: Int.
Pressing the button takes you to parameter
/reset
041 heating engineer's password.
Parameter 041: blinks.
Press to go to level c: for password
/reset
changes.
Letter c: for confirmation appears blinking.
Proceed as described in section Entering the
password and enter the former password.
After entry of the last character, the password
must be confirmed by pressing
Letter n: for new appears blinking.
Proceed as described in section Entering the
password and enter the new password (4
characters).
After entry of the last character, the password
must be confirmed by pressing
Letter r: for repeat appears blinking.
Proceed as described in section Entering the
password and repeat entry of the new password.
After entry of the last character, the password
must be confirmed by pressing
SEt confirms that the new password has been
saved.
VSD
to display
F A
.
/reset
.
/reset
.
/reset
80/116
CC1P7105en
24.07.2020