System Requirements - Siemens Gigaset SX682 WiMAX User Manual

Gigaset SX682 WiMAX with Siemens outdoor antenna
PC with Gigaset SX682 WiMAX
When used with the antenna integrated into the device or the Siemens
i
outdoor antenna, the Gigaset SX682 WiMAX complies with the regula-
tions on limiting the effect of electromagnetic fields on the general
population.

System requirements

To use the Gigaset SX682 WiMAX, the following requirements have to be fulfilled.
u
You will need a PC that meets the following requirements:
– PC with a free LAN interface 10/100BaseT (network adapter). The network
adapter on the configuration PC must support one of the following modes:
10BaseT Full Duplex, 100BaseT Half Duplex, 100BaseT Full Duplex. The TCP/IP
protocol has to be set up on the PC (standard installation for Windows XP and
Windows Vista; if you are using a different Windows operating system, read the
separate instructions on network configuration, if necessary).
– A Web browser is installed on the configuration PC (e.g. Internet Explorer or
Mozilla Firefox).
u
To access the Internet you will need to register your Gigaset SX682 WiMAX with a
WiMAX Internet provider. To use Internet telephony, your provider will need to reg-
ister a VoIP account for your Gigaset SX682 WiMAX.
System requirements
WiMAX network base
station
15