Table of Contents
Advertisement
Information about the optional outdoor antenna
The best results will be obtained if the Siemens
Fig. 1
outdoor antenna is in sight of the WiMAX base
station (cf. Fig. 1).
If a line of sight is not possible, you can reflect the
radio waves off neighbouring buildings. To do
this, direct the antenna at the building it is to
reflect off and not at the base station (cf. Fig. 2).
Fig. 2
The antenna mast must be structurally secure. Check how secure the various attach-
ments are.
The antenna mast must be within reach of the cable. Ideally, the antenna cable should
be protected outside (from frost, sun, unauthorised and mechanical influences etc.).
In particular, make sure the antenna mast has sufficient load capacity. If you are mount-
ing the mast on the roof, make sure the roof is fully sealed again afterwards.
Lightning protection
The antenna mast should be positioned near a lightning conductor. A suitable lightning
conductor must be installed where necessary.
The Siemens outdoor antenna is not designed to be struck directly by lightning and
must be protected accordingly. The antenna must therefore be mounted in areas that
are protected against lightning (Lightning Protection Zone 0B). The corresponding sep-
aration distance (IEC 62305) must be complied with.
Earthing and lightning protection work may only be carried out by electricians specifi-
cally qualified for such work.
7
Advertisement
Table of Contents
