Siemens Gigaset SX682 WiMAX User Manual page 63

Table of Contents

Advertisement

IEEE 802.16
Standard defined by the
(e.g. 802.3 Ethernet, 802.11 WLAN), the WiMAX standard is one of the standards for
networks. The standard has progressed in accordance with new developments; there
are currently two main versions:
u
IEEE 802.16-2004: WiMAX, which specifies the secure location for connection part-
ners.
u
IEEE 802.16e-2005: Mobile WiMAX, which enables wireless cells to be exchanged
during data transmission.
Internet telephony (VoIP)
Voice transmission via the Internet (Voice over IP).
IP
Internet Protocol. The protocol is responsible for addressing of subscribers in a network
using IP addresses, and routes data from the sender to the recipient. In doing so, it
decides on the way in which data packets will be forwarded between sender and recip-
ient.
IP address
An IP address is the unique network-wide address of a network component in a network
based on the
TCP/IP
consists of four parts (each of up to three-figure strings of digits from 0–255) that are
separated from one another by full stops (e.g. 192.168.2.1). The IP address is made up
of the network number and the number of the network component. Depending on the
Subnet
mask, one, two or three parts form the network number, the remainder form the
network component number. You can find out the IP address of your PC using the
ipconfig command.
There are two different types of IP address:
u
Private IP address:
IP address of a network component within a local network.
u
Public IP address:
IP address that uses a network component for accessing the Internet.
IP addresses can be assigned manually or automatically:
u
Static IP address:
The IP address is manually assigned to a network component and never changes.
u
Dynamic IP address:
The IP address is assigned to the network component by a DHCP server. The IP
address of this network component can change each time it registers with a network
or at specific time intervals.
On the Internet, domain names are normally used instead of the IP addresses. DNS is
used to assign domain names to IP addresses.
IEEE
for WiMAX. Similarly to other standards in the 802 series
protocol (e.g. in a local network or on the Internet). The IP address
Glossary
63

Advertisement

Table of Contents
loading

Table of Contents