Restarting And Resetting The Gigaset Sx682 Wimax; Rebooting The Gigaset Sx682 Wimax; Returning The Gigaset Sx682 Wimax To Factory Settings - Siemens Gigaset SX682 WiMAX User Manual

Restarting and resetting the Gigaset SX682 WiMAX

Rebooting the Gigaset SX682 WiMAX

ì
Briefly press the reset button (for less than 5 seconds). The configuration settings
will remain, the Gigaset SX682 WiMAX will be restarted.
You can also restart the Gigaset SX682 WiMAX by briefly cutting the power supply.

Returning the Gigaset SX682 WiMAX to factory settings

If you no longer have access to your Gigaset SX682 WiMAX, you can also restore factory
settings with the reset button on the back of the device.
!
When the factory settings are restored, all personal settings are deleted.
ì
Press and hold the reset button for more than 5 seconds.
The 4 RSSI LEDs will begin to flash green. The configuration settings are returned to the
factory settings and the Gigaset SX682 WiMAX is restarted. This process takes about
25 seconds. The Gigaset SX682 WiMAX will then automatically try to set up a connec-
tion to a WiMAX network; depending on the connection quality, 0 to 4 RSSI LEDs will
permanently light up green.
Factory settings
After restoring the factory settings, your Gigaset SX682 WiMAX will be in its original
condition:
Menu
Connection Wizard
Administration
Restarting and resetting the Gigaset SX682 WiMAX
The reset button is located inside the Gigaset
SX682 WiMAX so that it cannot be pressed
accidentally. If you need to restart or reset the
Gigaset SX682 WiMAX, use a thin object such as
an opened up paper clip.
Setting
Installation must be carried out again; see "Connection
wizard" on page 26.
No system password is set.
19