Configuration With The Web Browser; Launching The User Interface - Siemens Gigaset SX682 WiMAX User Manual

Table of Contents

Configuration with the Web browser

You do not need to install any software on your PC to configure your Gigaset SX682

WiMAX; the configuration software is stored on the device. Open this software in the

same way as an Internet page in the Web browser and make the required settings. Your

settings are then stored directly on the device.

The connection wizard will help you to get started and establish a connection with the

WiMAX network; you will not need to enter connection data to do this. You do not need

any information from your provider.

For experienced users:

– IP address: 192.168.2.1

– Subnet mask: 255.255.255.0

Presentation of the configuration software

To configure your Gigaset SX682 WiMAX, we recommend the Microsoft Internet

Explorer Version 7.0 or Mozilla Firefox Version 2.0 Web browser. However, you can also

use most other or older Web browsers.

Open your Web browser.

Enter the IP address of your Gigaset SX682 WiMAX in the address field of your Web

browser:

http://192.168.2.1

Press Enter (Return).

Your Gigaset SX682 WiMAX does not have a default system password; for this rea-

son, a security message appears first. You can set up your own system password

later; then once you have entered the IP address for your Gigaset SX682 WiMAX the

English registration page will open for you to enter your system password.

Click Ok.

Table of Contents