Panasonic KV-N1058X Operating Manual page 127

5.
Take out the new double feed prevention roller module in the optional roller exchange kit.
6.
Install the double feed prevention roller.
•
Align the shaft that is shaped as indicated by
the shaft in the notch. Push the shaft on the opposite side ( ) until it clicks into place.
7.
Close the double feed prevention roller cover ( ) firmly.
Notice
•
Be sure to close the double feed prevention roller cover until it clicks into place.
with the notch in the roller mount ( ), and then insert
2
1
3
1
14.3 Replacing the Rollers
127