Using The Mixed Batch Card Guide - Panasonic KV-N1058X Operating Manual

11.3.3 Using the Mixed Batch Card Guide

11.3.3 Using the Mixed Batch Card Guide
Set paper documents on the feed tray, and a card on the mixed batch card guide respectively.
•
The card set on the mixed batch card guide is fed after completing the paper document scanning.
•
For details about the compatible card types for this unit, refer to "7.1.2 Compatible Card" (page 45).
•
Set the card in landscape orientation.
•
Ensure that the embossed portions of cards do not stick together.
•
A maximum of 3 cards can be set in the mixed batch card guide.
•
If acceptable results cannot be obtained, try changing the scanning orientation or reversing the scan face
of the card, and then perform scanning again.
Note
•
When using the mixed batch card guide, the document guides cannot be adjusted to less than A5
size.
•
Make sure that the total height of the paper on the feed tray does not exceed 2 mm (0.08 in.). (This is
equivalent to about 20 sheets at 80 g/m² [21 lb.].)
90