8.1.2 Scanning by selecting "Output to" and the scan settings from the home screen
8.1.2 Scanning by selecting "Output to" and the scan settings
from the home screen
Perform scanning by the following procedure.
1.
Touch the desired output destination.
•
For details, refer to "8.1.2.1 Basic operation when setting "Output to" settings" (page 69).
2.
Touch the desired setting from the scan settings.
•
For details, refer to "8.1.2.2 Basic operations for specifying scan settings" (page 72).
3.
Place the documents on the feed tray (page 49).
4.
Press the Start/Stop button (
•
If [Confirm Output Path] of [Function Setting] is enabled, the output path will be displayed on the LCD.
Confirm the output path, and then press the Start/Stop button (
•
If [Confirm Output Path] of [Function Setting] is disabled, scanning will start.
•
Remove documents after they have been scanned.
68
) to start scanning.
) again.