8.1.6 Output File
The output image file name is as follows.
Prefix
1 to 15
1 character
characters
*2
Example
Panasonic_
-
DOC01
If a Factory Reset is performed on the unit, the Sequence ID that is applied to file names pushed to all destinations will also be
*1
reset. Therefore, you should assign a different folder path from the existing one to prevent existing data from unexpectedly being
overwritten.
Up to 31 characters if [Location] is selected. Up to 94 characters if [Combination] is selected. Up to 63 characters if [Manual
*2
Input] is selected.
6 characters when "Common File Counter" (page 79) is set to "On".
*3
•
When "Suffix Removal" (page 102) is set to "On", "Item delimiter", "Type Code" and "Sequence ID" are
not displayed.
Prefix
Type of prefix
Host Name
Date and Time
User Name
User-defined Field
Location
Combination
Item
Type Code
delimiter
1 character
M
3 to 15
14
1 to 15
1 to 15
1 to 31
1 to 94
Item
Sequence
delimiter
1 character
characters
-
00001
Number of characters
Dot
ID
*1
5
1 character
*3
.
Contents
Set the value of "Network
Setting" in "IP Configuration"
(page 105).
The format set in [Date & Time]
(page 98).
•
YYYYMMDDhhmmss
•
MMDDYYYYhhmmss
•
DDMMYYYYhhmmss
User authentication name.
Set the value of "File Name" in
"Scan Settings" (page 101).
Set the value of "Network
Setting" in "IP Configuration"
(page 105).
The following contents can be
combined. Set the value of "File
Name" in "Scan Settings" (page
101).
•
Host Name
•
Date and Time
•
User Name
•
User-defined Field
•
Location
8.1.6 Output File
Extension
3 characters
jpg
*1
77