Table of Contents
Advertisement
8.1.6 Output File
The output image file name is as follows.
Prefix
1 to 15
1 character
characters
*2
Example
Panasonic_
-
DOC01
If a Factory Reset is performed on the unit, the Sequence ID that is applied to file names pushed to all destinations will also be
*1
reset. Therefore, you should assign a different folder path from the existing one to prevent existing data from unexpectedly being
overwritten.
Up to 31 characters if [Location] is selected. Up to 94 characters if [Combination] is selected.
*2
Prefix
Type of prefix
Host Name
Date and Time
User Name
User-defined Field
Location
Combination
When user authentication is not used or LDAP authentication is used, "Host Name" is used as a "User Name".
*1
Item
Type Code
delimiter
1 character
M
3 to 15
14
1 to 15
1 to 15
1 to 31
1 to 94
Item
Sequence
delimiter
1 character
5 characters
-
00001
Number of characters
Dot
ID
*1
1 character
.
Contents
Set the value of "Network
Setting" in "IP Configuration"
(page 94).
The format set in [Date & Time]
(page 89).
•
YYYYMMDDhhmmss
•
MMDDYYYYhhmmss
•
DDMMYYYYhhmmss
User authentication name.
Set the value of "File Name" in
"Scan Settings" (page 91).
Set the value of "Network
Setting" in "IP Configuration"
(page 94).
The following contents can be
combined. Set the value of "File
Name" in "Scan Settings" (page
91).
•
Host Name
•
Date and Time
•
User Name
•
User-defined Field
•
Location
8.1.6 Output File
Extension
3 characters
jpg
*1
69
Advertisement
Table of Contents
