Table of Contents
Advertisement
6.2.3 Information display area
6.2.3.1 Setting menu
Touch the icon (
•
Touch the back button (
•
Touch the home button (
•
Touch the icon (
Function Setting
Item
Version
USB ID
Sleep (min.)
Auto Off
Auto Off (hour)
Auto Off (min.)
Buzzer volume
*1
Roller Cleaning
Notification
Roller Replacement
Notification
Glass Cleaning
Notification
Confirm Output Path
Preview
Email Subject
*2
Key buzzers, error buzzers etc.
*1
For details, refer to "12.2.1 Available characters in Configuration Web" (page 86).
*2
Network Setting
Item
LAN mode
DHCP
AutoIP
38
) to display the setting menu. Touch each item to open the setting screen.
) to return the LCD to the previous screen.
) to return the LCD to the home screen.
) to complete your selection.
Display the scanner's firmware version.
Display the scanner's USB serial number.
Set the length of time before entering sleep mode (1 to 120 min.).
Enables(On) or disable (Off) the power auto-off function.
Set the length of time before the auto-off function activates (15 min. to 72
hrs.).
Sets the volume of the buzzer sound (0 [OFF] / 1 / 2 / 3 [maximum]).
Enable (On) or disable (Off) the roller cleaning notification.
Enable (On) or disable (Off) the roller replacement notification.
Enable (On) or disable (Off) the scanner's internal cleaning notification
function.
Enable (On) or disable (Off) the function to display the confirmation dialog
when starting push scan.
Set preview function to display scanned image on LCD (Off / First Document /
Last Document / First and Last Document).
Sets the Email subject to be used when outputting to Email (up to 15
characters).
Displays the LAN mode (Wired LAN / Wireless LAN / Wireless LAN (AP)).
Enable (On) or disable (Off) DHCP.
Enable (On) or disable (Off) Auto IP. If DHCP is disabled, this setting cannot
be changed. This setting can also be changed from Network Setting Tool
(page 122).
Contents
Contents
Advertisement
Table of Contents
