Table of Contents
Advertisement
Item
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
WINS Server 1
WINS Server 2
IP Filtering
HTTPd
MAC Address
Host Name
*1
Location
*1
For details, refer to "12.2.1 Available characters in Configuration Web" (page 86).
*1
Display Setting
Item
Language
Date & Time
Home Screen
LCD Brightness
LCD Contrast
Select Counter
Counter
Item
Scan Counter
System Counter
Set the IP address. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 122).
Set the subnet mask. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 122).
Set the default gateway. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 122).
Set the primary DNS server.
Set the secondary DNS server.
Set the primary WINS server.
Set the secondary WINS server.
Enable (On) or disable (Off) the IP filtering function.
Enable (On) or disable (Off) the HTTPd.
If HTTPd is disabled, "Configuration Web" is not available.
Display the scanner's MAC Address.
Set the host name for the scanner (up to 15 characters).
You can input the location comment (up to 31 characters).
Set the language used on the LCD.
Set the date and time.
Sets the color of home screen (Light Blue / Black / Light Gray).
Sets the home screen (Home Screen 1 / Home Screen 2).
Set the LCD brightness (64 levels).
Set the LCD contrast (64 levels).
Select the counter from [Scan Counter] or [System Counter] that appears on
the Home screen and the screen displayed during scanning.
The number of documents scanned during the scanning process. The scanned
quantity is cleared each time you start scanning.
The number of documents scanned by the scanner since it was shipped from
the factory.
6.2.3 Information display area
Contents
Contents
Contents
39
Advertisement
Table of Contents
