8.1.5 Perform Push Scan Using Jobs
Operate the unit as follows.
Note
•
If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
•
If the output destination is a computer connected via LAN, you can select a job from the top 10 jobs in
the job settings list.
1.
Touch the Favorite button (
2.
Depending on the output destination, touch [USB] or [PC].
•
If the output destination is a computer connected via USB.
•
If the output destination is a computer connected via LAN.
3.
Select a job.
•
If the output destination is a computer connected via USB, select the job after selecting the group.
•
If the output destination is a computer connected via LAN, select the job after selecting the computer.
4.
Place the documents on the feed tray (page 47).
•
If the output destination is a computer connected via USB:
–
When "Touch Free Scanning" is selected, scanning will start when documents are placed on the
feed tray.
–
When "Single Touch Scanning" is selected, press the Start/Stop button (
).
8.1.5 Perform Push Scan Using Jobs
) to start scanning.
67