Station Mode - Panasonic KV-N1028X Operating Manual

4.3.3.2 Station Mode

After installing the software, you can use this unit in station mode of wireless LAN by the following
procedure.
1.
Touch the icon (
2.
Touch [LAN mode]
3.
Touch the icon (
4.
Touch the icon (
5.
Touch [Wi-Fi Protected Setup (WPS)]
6.
Press the WPS button on your wireless access point.
Note
After switching the LAN mode, connection with paired computers may be interrupted. To re-establish
connectivity with existing PC's over the LAN, the Network Scanner Select Tool should be used. For
details, refer to "4.4.3 Changing the Scanner Connected over LAN" (page 29).
) on the home screen.
[Wireless LAN Station Mode].
) to complete your selection.
).
4.3.3 When using this unit with a wireless LAN connection
[Push Button Configuration].
27