Toro LT2240 Installation Instructions Manual page 9

B. As the platform nears the fully lowered position, move the platform-latch handle
the front of the machine.
Note:
This ensures that the latch hooks clear the locking bar.
1. Platform-latch handle
C. Fully lower the platform and move the platform-latch handle toward the rear of the machine until the
latch hooks fully engage the locking bar
1. Platform-latch handle
6. Remove the existing seat with the control arm attached from the platform.
Note:
Discard the 4 bolts (8 x 25 mm) and 4 locknuts (8 mm).
Figure 11
Figure 12
2. Locking bar
(Figure 13).
Figure 13
9
g290371
(Figure 12) toward
g290369
g290370