Table of Contents
Advertisement
14. Help
Problem
Static, sound cuts in/out,
fades. Interference from other
electrical units.
Noise is heard, sound cuts in
and out.
The cordless handset beeps
and/or
flashes.
I fully charged the batteries,
but
–
still flashes, or
– the operating time seems
to be shorter.
I cannot make calls with the
cordless handset.
I cannot make long distance
calls with the cordless
handset.
Caller information is
displayed late.
I cannot dial the telephone
number edited in the caller
list.
The 2nd caller's information
is not displayed during an
outside call. (Visual Call
Waiting feature does not
function.)
I cannot register a cordless
handset to a base unit.
120
Cause & Solution
R Place the cordless handset and the base unit away from other electrical
appliances.
R Move closer to the base unit.
R You are using the cordless handset or base unit in an area with high
electrical interference. Re-position the base unit and use the cordless
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL
filter between the base unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
R Battery charge is low. Fully charge the batteries (page 22).
R Clean the battery ends ( ,
charge again.
R It is time to replace the batteries (page 19).
R The cordless handset is too far from the base unit. Move closer and try
again.
R Make sure that you have long distance service.
R Depending on your service provider/telephone company, the unit may
display the caller's information at the 2nd ring or later.
R Move closer to the base unit.
R The telephone number you dialed might have been edited incorrectly (for
example, the long distance "1" or the area code is missing). Edit the
telephone number with another pattern (page 55).
R In order to use Call Display, Call Waiting, or Visual Call Waiting, you must
first contact your service provider/telephone company and subscribe to the
desired service.
After subscribing, you may need to contact your service provider/telephone
company again to activate this specific service, even if you already
subscribed to both Call Display and Visual Call Waiting services.
R The maximum number of cordless handsets are already registered to the
base unit. Cancel unused cordless handset registrations from the base unit
(feature #131 on page 103).
) and the charge contacts with a dry cloth and
Advertisement
Table of Contents
