Table of Contents
Advertisement
Feature/Code
Setting the PC information for
notification of fax reception
(LAN connection only)
R This feature can be
programmed only through
the web browser interface.
Setting the fax to email
destinations (LAN connection
only)
R This feature can be
programmed only through
the web browser interface.
Selection
Select the PC to send fax reception notification message to (up to 6
destinations).
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Device Configuration]
3. Type "root" as the user name, then enter the password (feature #155 on
page 79). A [OK]
4. Select the [FAX FEATURE] tab.
5. Click [Edit] next to [RECEIVE PC LIST].
6. Click [List] next to the desired destination.
7. Click the desired PC from the list. A [Submit]
8. Close the web browser.
Select email destinations where you want to send received fax document
automatically (up to 6 destinations).
Important:
R Program the email server settings (page 97), and the email
destinations (page 98) beforehand.
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Device Configuration]
3. Type "root" as the user name, then enter the password (feature #155 on
page 79). A [OK]
4. Select the [FAX FEATURE] tab.
5. Click [Edit] next to [DESTINATION].
6. Click [Address Book] next to the desired destination.
7. Click the desired name you want to send the received fax documents to.
8. [Submit]
9. Close the web browser.
Note:
R To check the status of the last 15 transfers, click [List] next to [RESULT] in
step 5.
11. Programmable Features
87
Advertisement
Table of Contents
