Table of Contents
Advertisement
Feature/Code
Selecting the scale
MBNM1NM4NM7N
Changing the password for
feature programming via
remote operation
MBNM1NM5NM5N
Setting the toner
maintenance time
MBNM1NM5NM8N
Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N
Setting the ringtone for
*2
outside calls
MBNM1NM6NM1N
Selection
M1N "MILLIMETRES"
M2N "INCHES" (default)
Note:
R The selected scale will be used when measurements are shown on the base
unit's display.
1. MMenuN A MBNM1NM5NM5N A MSetN
2. Enter the current password. A MSetN
R The default password is "1234".
3. Enter a new 4-digit password using 0-9. A MSetN
4. Enter the new password again. A MSetN A MMenuN
Note:
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser (LAN
connection only).
The base unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the base unit
makes during maintenance cannot be stopped. However, if the base unit's noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
R The default time is "12:00PM".
R Press MGN repeatedly to select "AM" or "PM".
R If you select French for the language (feature #110 on page 78), the
default time is "12:00".
3. MSetN A MMenuN
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
Phonebook (or caller information) and fax transmission data (journal report and
faxes received in memory) will be deleted.
M0N "NO" (default)
M1N "YES"
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
R Date and time setting on the cordless handset programming will also be
reset (page 99) (KX-MB2060 optional).
To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select "YES". A MSetN
3. Press M1N to select "YES". A MSetN
M1N "RINGTONE 1" (default)
M2N "RINGTONE 2"
M3N "RINGTONE 3"
M4N "RINGTONE 4"
M5N "RINGTONE 5"
M6N "RINGTONE 6"
11. Programmable Features
79
Advertisement
Table of Contents
