Recovered Toner Supply Mechanism - Toshiba e-STUDIO163 Service Manual
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
12.3.3
Recovered toner supply mechanism
The toner scraped off by the drum cleaning blade is transported by the toner recovery auger and the
toner recycling auger to be recycled, and then returned into the developer unit. Then the recovered
toner in the developer unit is mixed by the developer material using the mixer-3. The mixer-3 is
mounted exclusively for the recovered toner to mix it in a sufficient period of time. On the other hand,
the (fresh) toner transported from the toner cartridge into the developer unit is mixed by the mixer-2.
Then the (fresh) toner and the recovered toner are mixed together and further transported to the mixer-
1. They are further mixed by the mixer-1 and transported to the developer sleeve.
Mixer-1
Mixer-2
Mixer-3
e-STUDIO163/203
DEVELOPMENT SYSTEM
Fresh toner
Recovered toner
Toner recycling auger
Drum cleaner
Toner recovery auger
Fig. 12-2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
12 - 6
Toner cartridge
Advertisement
Table of Contents
