Toshiba e-STUDIO163 Service Manual page 217

Note:
When installing the guide, secure the spring
to the hook of the fuser unit and the other
end of the spring to the guide.
[E] Separation finger
(1) Take off the fuser roller unit.
P.13-11 "[B] Pressure roller unit / Fuser
roller unit"
(2) Remove 5 springs.
(3) Take off 5 separation fingers.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Hook Spring
Fig. 13-18
Fuser roller unit
Fig. 13-19
Separation finger
Fig. 13-20
13 - 15
07/02
Guide
Spring
e-STUDIO163/203
FUSER / EXIT UNIT
13