(7)
Remove 2 bushings and 2 oil seals on the
rear side.
(Replacement of Oil seal:
Replacement of Oil Seal")
(8)
Remove the end section of the mixer-1.
(9)
Remove the bushing and oil seal.
(Replacement of Oil seal:
Replacement of Oil Seal")
(10) Take off the mixer-1.
e-STUDIO163/203
DEVELOPMENT SYSTEM
P.12-21 "[H]
End section of mixer-1
P.12-21 "[H]
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
12 - 20
Oil seal
Fig. 12-31
Bushing
Oil seal
Fig. 12-32
Mixer-1
Fig. 12-33
Bushing