Toshiba e-STUDIO163 Service Manual page 59

- Magnetic roller
Magnetic brush development
The south and north poles are arranged inside the magnetic roller as shown in the right figure.
The developer material forms a brush-like fluff which contacts the photoconductive drum surface.
È
This is caused by the magnetic force lines between the south and north poles.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Photoconductive
drum
N
Magnetic roller
Fig. 3-13
3 - 7
Magnetic force
line
3
e-STUDIO163/203
COPY PROCESS