Wall-Mounting The Sun2000; Determining The Installation Position - Huawei SUN2000 Series User Manual

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)
User Manual
Tool
Cable tie

4.3 Wall-mounting the SUN2000

4.3.1 Determining the Installation Position

Basic Requirements



Installation Environment Requirements
The SUN2000 must be installed in a well-ventilated environment to ensure good heat
dissipation. When installed under direct sunlight, performance de-rate may be initiated due to
additional temperature rise. Recommended: Install the SUN2000 in a sheltered place or a
place with an awning.
Carrier Requirements




Installation Angle Requirements

Issue 11 (2019-06-08)
The SUN2000 is protected to IP65 and can be installed indoors or outdoors.
Do not install the SUN2000 in a place where personnel are easy to come into contact
with its enclosure and heat sinks, because these parts are extremely hot during operation.
Do not install the SUN2000 in areas with flammable or explosive materials.
The carrier where the SUN2000 is installed must be fireproof.
Do not install the SUN2000 on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight load.
In residential areas, do not install the SUN2000 on gypsum boards or walls made of
similar materials which have weak sound insulation performance because the noises
generated by the SUN2000 disturb residents.
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to facilitate heat
dissipation.
Copyright © Huawei Technologies Co., Ltd.
Model
N/A
4 System Installation
Function
Binds cables.
21