Huawei SUN2000 Series User Manual page 76

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)
User Manual
Step 2 Adjust the support bar.
Figure 5-42 Adjusting a support bar
Step 3 Close the maintenance compartment door. Tighten the two screws on the maintenance
compartment door using a security torx wrench to a torque of 5 N· m.
Figure 5-43 Tightening screws on the maintenance compartment door
Issue 11 (2019-06-08)
 If a screw on the maintenance compartment door is missing, use the unused ground screw on the
chassis shell as a standby screw.
 If the floating nut used for securing the maintenance compartment door is missing, use the standby
floating nut shown in Figure
Copyright © Huawei Technologies Co., Ltd.
5-44.
5 Connecting Cables
69