Huawei SUN2000 Series User Manual page 53

Hide thumbs Also See for SUN2000 Series:

Table of Contents

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)

User Manual

Figure 5-10 Four-core cable (including the ground cable but excluding the neutral wire)

Figure 5-11 Four-core cable (excluding the ground cable but including the neutral wire)

Figure 5-12 Five-core cable (including the ground cable and neutral wire)

Step 5 Insert the exposed core wires into the crimping area of the OT terminal and crimp them using

hydraulic pliers.

Step 6 Wrap the wire crimping area with heat shrink tubing or PVC insulation tape.

Step 7 Route the AC output power cable through the AC OUTPUT 1 connector at the bottom of the

chassis.

Issue 11 (2019-06-08)

One core wire connects to one OT terminal.

If heat shrink tubing is used, put it through the power cable and then crimp the OT terminal.

5 Connecting Cables

Table of Contents

Sun2000-29.9ktl Sun2000-33ktl-a Sun2000-36ktl Sun2000-42ktl