SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)
User Manual
Procedure
Step 1 Remove the security torx wrench from the mounting bracket and set it aside.
Figure 4-10 Removing a security torx wrench
Step 2 Determine the positions for drilling holes using the mounting bracket available in the packing
case. Level the hole positions using a level, and mark the hole positions using a marker.
Figure 4-11 Determining hole positions
Step 3 Drill holes using a hammer drill and install expansion bolts.
Avoid drilling holes in the water pipes and power cables buried in the wall.
An expansion bolt contains four parts, as shown in
Issue 11 (2019-06-08)
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
Figure
4-12.
27